User manual SYLVANIA DV220SL8

[. . . ] If you need additional operating assistance after reading this owner's manual, please call From the unit from TV The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. FCC WARNING - This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the manual. [. . . ] To use the VCR as usual until the time for the recording, press [T-SET] so that indicator lights off. After an one-touch timer recording or a timer recording has been set, this unit operates as follows: ⷠIf a cassette tape runs out before an one-touch timer recording or a timer recording is finished, the unit ejects the cassette tape. Press [T-SET] on the remote control or [STOP/EJECT C A] on the unit, then press [VCR ] to activate the VCR function again. ⷠOnce the unit turns to the timer standby mode, no VCR functions are available until [T-SET] is pressed. ⷠTo cancel the timer standby mode, press [T-SET] on the remote control or [STOP/EJECT C A] on the unit, then press [VCR ] to activate the VCR function again. If auto power off for DVD has been activated and there are timer recordings on standby, the unit turns off automatically, and indicator on this unit lights to indicate the unit is in the timer standby mode. ⷠIndicator on this unit flashes if there are no more timer recordings on standby. ⷠIf auto power off for DVD has NOT been activated, the unit goes to the DVD mode and all the VCR functions will be unavailable. All the DVD functions are available during one-touch timer recording, timer standby mode and timer recording. ⷠPress [STOP/EJECT C A] on this unit or [T-SET] on the remote control to use the VCR when the unit is turned off. ⷠPress [OUTPUT] on this unit or [VCR ] on the remote control to use the VCR when the unit is turned on. In case timer recording is in standby mode, press [STOP/EJECT C A] on this unit or [T-SET] on the remote control, and then press [OUTPUT] on this unit or [VCR ] on the remote control. If you want to use the DVD player during a timer recording or while ] on the remote control to choose DVD mode, then continue with the other DVD If there is a power failure or the unit is unplugged for more than 30 seconds, clock setting and all timer programs will be lost. You can set the unit to start recording whenever it detects a video signal from the external tuner. Satellite link accepts only the connection from L1 (rear) with the external tuner. (The connection from L2 cannot read any signals from the cable/satellite box. ) · The external tuner should be equipped with some kind of timer function. Using timer function of the tuner, set it to output audio/video signals when it comes to the time you want to start recording, and stop output audio/video signals when it comes to the time you want to finish recording. ⷠSatellite unit must be turned on for VCR satellite link to start. If cable/satellite box is not set to output signals, satellite link will remain in standby mode. To cancel the satellite link function while the satellite link recording is in progress: Press [STOP/EJECT C A] on this unit. ⷠWhen the external tuner signal is stopped, recording will be stopped. [. . . ] Read the description in this manual for details on correct operations. ⷠPlayback from a desired track and random playback are not available during programmed playback. Video or color fades in and out when making a copy of a cassette tape. ⷠIf there is a discrepancy between languages, the default language will be English. [. . . ]