User manual SYLVANIA CR202SL8

[. . . ] READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for future reference. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed. EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. [. . . ] You can easily switch the DTV (ATSC) and TV (NTSC) with the remote control and enjoy viewing the TV programs with simple operation. When you switch the analog mode to the digital mode, it may take a while until the digital channel selection is completed. 1 channel number 2 broadcast station 3 program title 4 audio language Press [AUDIO] repeatedly to cycle through the available audio languages. ("OTHER" is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French. Use your remote control to access an external device when they are connected to the unit. To use the video or S-video input jack on the rear of the unit, select "VIDEO1". To use the video input jack on the front of the unit, select "VIDEO2". KABC CH 95-03 A Day of Memories ENGLISH A quarter-century ago, which may now qualify as the good old days of newspapering, run-of-paper sales accounted for 80 percent of the industry's advertising revenues. You can display the currently selected channel or other information such as the audio mode on the TV screen. When the program guide consists of more than 6 lines, use [VOL X/Y] to scroll. "No description provided" is displayed when the program guide is not provided. While the program guide is displayed, the closed caption function is interrupted. The current channel number is displayed at the topright corner of the TV screen. The sleep timer can be set to automatically turn off the unit after an incremental period of time. Use [CH K /L] to select "DTV DISPLAY", then use [VOL X /Y] to switch the desired TV aspect ratio. You can set the unit to turn off after a set period of time (from 30 to 120 minutes). After set up, the sleep timer display can be called up for checking by pressing [SLEEP]. When you disconnect the unit from the AC outlet or when a power failure occurs, the sleep timer setting will be canceled. [ZOOM] Enlarge and display the center area of the digitalsupported program. The channel add/delete function lets you add the channel that was not added by the auto channel scan due to the reception status at the initial setting. In the digital mode (DTV), you can add or delete channels only for major channel. Once you delete a DTV channel, you cannot recover the channel without performing auto channel scan again. [. . . ] Wipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry. If the remote control is not working properly, you can use an AM radio or digital camera (including a cellular phone with built-in camera) to see if it is sending out an infrared signal. With a digital camera (including built-in cell phone cameras) Point a digital camera towards the remote control. Push any button on the remote control and look through the digital camera. [. . . ]