User manual SYLVANIA CLT4913

[. . . ] The user could lose the authority to operate this equipment if an unauthorized change or modification is made. RADIO-TV INTERFERENCE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] When the programmed starting and ending time are earlier than the current time, the setting will not be accepted and be cleared for redoing. If the starting time is earlier and the ending time is later than the current time, the recording will start right after you turn the power off. Timer program which has the earlier start time will be placed first in the timer program list, and be given priority over the programs with the later start time when timer programs overlap. When timer programs overlap, the first 2 minutes (at the longest) of the later recording will be cut off. When 2 or more timer programs have the same start time, the program set first will be given priority. A timer recording of lower priority will be canceled or start from the middle. When the recording time of 2 programs are overlapped, or the end time of a program and the start time of another program is the same, the first 2 minutes (at the longest) of the subsequent program will be cut off. If the cut-off portion comes up to 3 minute or more, this program will be displayed with error number E40 in the timer programming list. When the end time of the programming currently being recorded and the start time of the subsequent program are same: The beginning of the PROG. You can set the unit to start recording whenever it detects the video signal from the external tuner. preparing for the satellite link timer recording: Preparation on the tuner · Satellite link accepts only the connection from L1 (rear) with the external tuner. The contents of DVD are generally divided into titles, and the titles are subdivided into chapters. Data disc contains MP3/JPEG are divided into folders, and the folders are subdivided into files. Audio CD track 1 track 2 track 3 track 4 track 5 Each title, chapter, or track, folder or file is assigned a number, which is called "title number", "chapter number", "track number", "folder number" or "file number" respectively. Turn on the TV and be sure to select the input to which the unit is connected. Press [OPEN/CLOSE A] to open the disc tray and insert your disc with its label facing up. Turn on the TV and be sure to select the input to which the unit is connected. Press [OPEN/CLOSE A] to open the disc tray and insert your disc with its label facing up. Use [K / L] to select "Play From Start", then press [ENTER]. You can also start playback by pressing [PLAY B] instead of [ENTER] at step 5. At step 4, you can press [SKIP G], or press [B] when the title on the lower right of the title list is highlighted to display the next page, and press [SKIP H], or press [{] when the title on the upper left of the title list is highlighted to display the previous page. To eject the disc, press [OPEN/CLOSE A] to open the disc tray, then remove the disc before turning off the unit. [. . . ] The most common system of encoding digital audio, found on CD and DAT. excellent quality , but requires a lot of data compared to formats such as Dolby Digital and MPEG audio. For compatibility with digital audio recorders (CD, MD and DAT) and AV amplifiers with digital inputs, this unit can convert Dolby Digital and MPEG audio to PCM. Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as it is high). [. . . ]