User manual SYLVANIA 6509DD

[. . . ] OWNER'S MANUAL 9-INCH COLOR TV/DVD 6509DD This Owner's Manual is made of recycled paper. INSTRUCCIONES EN ESPAÑOL INCLUIDAS. As an ENERGY STAR ® Partner, our company has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. registered mark. If you need additional assistance for set-up or operating after reading owner's manual, please call TOLL FREE : 1-800-968-3429. Or visit our WEB SITE at http://www. funai-corp. com Please read before using this equipment WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] 2 To continue playback, press PLAY. Note for using buttons on the main unit: Press PAUSE, then, press and hold down the SKIP G/ SEARCHg or SKIPH /SEARCHh on the TV/DVD for a few seconds to begin Search in 1/16 speed of the normal playback. Repeat this procedure to change to 1/2. STEP BY STEP PLAYBACK DVD-V 1 During playback, press PAUSE. 2 The disc goes forward by one frame each time PAUSE is pressed. ZOOM DVD-V The Zoom function allows you to enlarge the video image and to pan through the enlarged image. 1 Press ZOOM during playback. 2 Press ZOOM repeatedly to select the required zoom factor: ZOOM1, ZOOM2, ZOOM3, or OFF. 3 To exit step by step playback, press PLAY. FAST FORWARD/REVERSE SEARCH DVD-V CD MP3 1 During playback, press FWD g or REV h ¡For audio CDs, the speed is fixed at ×16. repeatedly to select the required forward or reverse speed: x2, x8, x50, x100. 3 Use the Arrow (K/ L/s / B) to move the zoomed picture across the screen. 4 To exit zoom mode, press ZOOM to OFF. NOTES ¡Zooming function does not work while disc menu is shown. ¡Zooming function is not available on some discs. 2 To return to normal playback, press PLAY. Note for using buttons on the main unit: During playback, press and hold down the SKIP G / SEARCHg or SKIPH /SEARCHh on the TV/DVD for a few seconds to begin Search in x2 speed. Repeat this procedure to change to x50 and x100. ­ 20 ­ EN 0C28 SEARCH FUNCTION TRACK SEARCH CD There are three ways to begin playback on an Audio CD at a specific Track. Using Number on the remote control TIME SEARCH DVD-V CD 1 During playback, press SEARCH MODE three times (CD: twice) to display the Time Search on the TV screen. 1 Press Number to enter the desired Track number. ¡For single digit tracks (1-9), press a single number 2 Within 30 seconds, enter a desired disc time using Number on the remote control. track 3, press 3). ¡To play track 26, press +10, 2, 6. MARKER SETUP SCREEN DVD-V CD Using SEARCH MODE 1 Press SEARCH MODE. 2 Within 30 seconds, select a desired track number using Number on the remote control. ¡Playback will start at the selected track. Use markers to memorise your favorite places on a disc. 1 Press SEARCH MODE four times (CD: three times) during playback. ¡The display screen and Markers will appear on the TV screen. ¡If SKIP is pressed while the playback is paused, the playback will be paused again after skipping to the next track. NOTE ¡SKIP H G are not available when playback is stopped. 2 Press Arrow (s/ B) to select 1, 2, 3, 4, 5, 6, 7, 8, 9, or 10 and ensure that "- : - - : - -" appears in the display. 3 When reaches the desired point, press ENTER. ¡The Title or Track and elapsed playing time will appear in the TV screen. 4 To return to the Marker later, press SEARCH MODE four times (CD: three times) during playback and Arrow (s/ B) to choose the desired marker, then press ENTER. TITLE / CHAPTER SEARCH DVD-V 1 Press SEARCH MODE once for the Chapter search, twice for the Title search during playback. /2 NOTES ¡Opening the disc tray or turning off the power or select AC at step 2 and press ENTER will erase all Markers. ¡To clear a marker, using Arrow (s/ B), position the cursor on to the marker number to be cleared and press CLEAR. ¡You can mark up to 10 points. 2 Enter the desired chapter/title number using Number on the remote control. ¡For single digits press 0 first. 5 Press SEARCH MODE or RETURN to exit. ­ 21 ­ EN 0C28 SPECIAL PLAYBACK FUNCTION REPEAT REPEAT is available only during playback. PROGRAM CD DVD-V You may determine the order in which tracks will play. REPEAT TITLE / CHAPTER To activate the repeat function, press REPEAT during playback. ¡The repeat mode changes as described below every 1 In stop mode, press MODE. ¡Press CLEAR to erase the TOTAL time you press the button. CHAPTER TITLE (current chapter repeat) (current title repeat) OFF (repeat off) most recently entered program. NOTES ¡Repeat Title/Chapter is not available with some scenes. ¡The REPEAT setting will be cleared when moving 3 Repeat step 2 until you have selected all the tracks you want to play in the program. to other title or chapter. REPEAT TRACK CD To activate the repeat function, press REPEAT during playback. ¡The repeat mode changes as described below every 4 Press PLAY to play the programmed tracks. NOTES ¡While the program is being played back, the STOP works as follows. ¡Press STOP once and then PLAY again, playback time you press the button. TRACK (current track repeat) ALL (entire disc repeat) OFF (repeat off) NOTES ¡Repeat setting will be cleared when moving to other track. ¡Repeat playback does not function during repeat A- will restart from the point where STOP was pressed. (Program continued) ¡Press STOP twice and then PLAY again, playback will restart from the track in the usual way. [. . . ] NOTA: Para confirmar que los canales hayan sido borrado o agregados, pulse CHANNEL(CH. ) K o L. ­ 37 ­ ES 0C28 DVD SECTION REPRODUCCIÓN DE UN DVD DE VÍDEO O UN CD DE AUDIO REPRODUCCION BASICA DVD-V CD Para empezar ¡Conecte el interruptor del amplificador y otros equipos, si fuera necesario. 1 Pulse el boton POWER. ¡La alimentación se conectará. 2 Pulse el botón OPEN/CLOSE. ¡La bandeja de carga del disco se abrirá. 3 Ponga el dlsco en la bandeja con el lado de la eliguta hacia arriba. 4 Pulse el botón PLAY. ¡La bandeja se cerrará automáticamente y la reproducción empezará luego desde el primer capítulo o pista del disco. [. . . ]