User manual SYLVANIA 2920CLV

[. . . ] SYSTEM 347-480V PHO HT allows operation of the ballasts in industrial applications using a 480V AC system. This eliminates the need to rewire existing 480V installations or to drop the voltage by using expensive and bulky transformers. [. . . ] The same product can also be used for 347V applications, allowing for a reduction in inventory model numbers. SYSTEM 347-480V PHO HT is specifically designed for high ambient temperature applications. The ballast can be operated at case temperatures of up to 90°C, making it an ideal choice for high ambient settings such as industrial high-bay lighting. SYSTEM 347-480V PHO HT ballasts contain QUICKSENSE ballast technology, a patented circuitry designed to shut down the system reliably and safely when lamps reach end-of-life. <10% THD Electronic T5HO Fluorescent Programmed Rapid Start Systems Normal Ballast Factor HT 2920CLV Key System Features · · · · · · · · · 90°C maximum case temp. 347-480V input voltage range Low-profile (1. 00" High) 100% Ballast factor QUICKSENSE® ballast technology (end-of-lamp-life sensing) PROStart programmed rapid start UL type CC rated 0°F (-18°C) Starting Operates at >40 kHz to reduce potential interference with infrared control systems High power factor Low harmonic distortion Lightweight UL, CSA, FCC Setting the standard for quality, SYSTEM 347-480V PHO HT is also covered by our QUICK 60+® warranty, the first and most comprehensive system warranty in the industry. SYSTEM 347-480V PHO HT is available in a two lamp model to cover a wide range of applications. warranty) FCC 47CFR Part 18 Non-Consumer Class A Sound Rating ANSI C62. 41 Cat. A Transient Protection Dynamic End-of-Lamp-Life Sensing Remote Mounting (Max. wire length from ballast case to lampholder): up to 18 feet4 Installation Notes · For 480V applications connect two phases (line and line) to the input · For 347V applications connect line and neutral to the input as shown (DO NOT CONNECT two phases of 347V to the same ballast) · Switching: Simultaneously disconnect all ungrounded line conductors per NEC codes (i. e. switch both hot legs) · Ground ballast case: Install in accordance with the National Electric Code 480V Line (Black) Line (Black) 347V Line (Black) Neutral (White) Line Input 2920CLV Line Input Line Input BALLAST BALLAST Red LAMP LAMP Red Yellow LAMP Blue Blue 1 LAMP 2 LAMP Dimensions: Model QTP2x54 T5HO/347-480 PSN HT enclosure size: Overall: 16. 73"L x 1. 18"W x 1. 0"H (425mm L x 30mm W x 25. 4mm H) Mounting: 16. 34" (415mm) Wiring: Push-in connectors Use 18AWG solid copper wire only Product Weight: 0. 88 lbs (0. 40kg) each (approx) 414. 0 mm 16. 3" Mounting Length 425. 0 mm 16. 73" Length 25. 4 mm 1. 0" Height 3 Data based on PENTRON HO lamp types for primary ballast application. 4 Operation below 50°F (10°C) may affect light output or lamp operation ­ see "Low Temp. Keep blue leads <10 feet. System Life / Warranty QUICKTRONIC products are covered by our QUICK 60+® warranty, a comprehensive lamp and ballast system warranty. [. . . ] 4 Operation below 50°F (10°C) may affect light output or lamp operation ­ see "Low Temp. Keep blue leads <10 feet. System Life / Warranty QUICKTRONIC products are covered by our QUICK 60+® warranty, a comprehensive lamp and ballast system warranty. [. . . ]