User manual SWEEX US102 QUICK_START_GUIDE

[. . . ] Englishversion US102 Sweex 4 Port USB 2. 0 PCI card Introduction First of all, many thanks for purchasing this Sweex 4 Port USB 2. 0 PCI card. To ensure this product operates correctly, we advise you to carefully read this manual first. [. . . ] Do this by touching a (neutral) pipe of the central heating system or an unpainted water pipe, among other things. Before you proceed any further, briefly touch the iron frame of the PC casing. Make sure that you minimise contact with any contact points of the PC, PCI card or the memory. Find a vacant PCI slot and remove the metal guard plate part of the computer casing in front of the relevant slot. On occasion the card does not allow for it to be inserted in the PCI slot smoothly. Should this be the case, do not force anything, but try another available slot. Once the card has been successfully installed, check whether all other cards are still properly inserted in the PCI slots. It is possible that the other PCI cards are lifted up slightly when installing a new PCI card; as a result, the relevant cards or even the entire PC may no longer operate correctly. Replace the casing on the computer base and correctly reconnect all cables. Switch on the PC again. During installation you may be prompted for the Windows 98 CD-ROM, so have this ready. [. . . ] Warranty claims are only settled via the dealer where the product concerned was purchased. The rightful owner has and retains title to all brand names and related rights mentioned in this manual. [. . . ]