User manual SWEEX SW005 QUICK_START_GUIDE

[. . . ] Englishversion SW005 Sweex 5 Port Switch 10/100 Mbps SW008 Sweex 8 Port Switch 10/100 Mbps Introduction First of all, many thanks for purchasing the Sweex 5/8 Port Switch 10/100 Mbps. [. . . ] The following parts must be present in the box: · Sweex 5/8 Port Switch 10/100 Mbps · Power supply adaptor · CD-ROM with manual If one of the above parts is missing, please contact the shop or supplier. Specifications · · · · · Number of ports SW005: 5 x 10/100 Mbps UTP/RJ45 port Number of ports SW008: 8 x 10/100 Mbps UTP/RJ45 port Supports: IEEE 802. 3 10BASE-T, IEEE 802. 3U 100BASE-TX Supports: Full and half duplex (Auto-Negotiation) Not operating system dependent Additionalspecifications · · · · · · Uplink facility for each port Network protocol: CSMA/CD External power supply SW005: AC12V, 0. 35A External power supply SW008: AC 9V, 0. 8A Operating temperature: 0 -50 °C Humidity: 10 - 90% Englishversion Installationofhardware Connect the power supply adaptor to the side of the switch. Connect PCs or other network equipment that you wish to incorporate in the network to a free port at the back of the switch. The front or top of the switch has a number of LEDs which indicate the status of the switch. LINK/ACT Colour Red Green Green Status Lit up Lit up Blinking Explanation This LED is lit up when the device is switched on The port is connected to a PC or other network device The port is sending or receiving data Basicnetworksetup On its website, Sweex has published a comprehensive description, detailing the basic setup of a network. Go to www. sweex. com, look under the product you have purchased and then select "manual". Then click on the link ending in man_all_network. Warranty All products under the Sweex brand are warranted for a period of three years. [. . . ] The rightful owner has and retains title to all brand names and related rights mentioned in this manual. [. . . ]