User manual SWEEX HM301

[. . . ] Englishversion HM301 Sweex Speaker Control Neckband Headset Introduction First of all, many thanks for purchasing this Sweex Speaker Control Neckband Headset. [. . . ] · Do not use the Sweex Speaker Control Neckband Headset in extremely dusty or moist surroundings. · Protect the device against powerful shocks or jolts - they may damage the internal electronics. · Never attempt to open the device yourself - it will cause the warranty to lapse. Contentsofthebox Prior to using the Sweex Speaker Control Neckband Headset, check if all required parts are present. The following parts must be present in the box: · Neckband headset · CD-ROM with manual If one of the above parts is missing, please contact the retail outlet where you purchased the device. Specifications · · · · · · · · · · Driver diameter headset: 30 mm Impedance of headset: 32 Sensitivity of headset: 105 dB Sensitivity of microphone: 58 dB Frequency range of headset: 20hz - 20Khz Frequency range of microphone: 20 - 16Khz Connectors: 3. 5 mm stereo jack-plug Cable length: 230 cm Volume control integrated in the cable Option to connect speakers (loud speakers) Englishversion Connecting Connect the pink microphone connection to the microphone input on your computer or other sound source. Subsequently, connect the green headphone connection to the headphone output of the computer. The other green connection (female) is for connecting speakers (optional). This way you can still connect your speakers should the computer only have a single output. Through the headset operation section you can either select headset or speakers. Operation The operation section for this headset is integrated in the headphone cable. [. . . ] The rightful owner has and retains title to all brand names and related rights mentioned in this manual. [. . . ]