User manual SUPERMICRO X8STI-LN4

[. . . ] To prevent fire or shock hazard, do not expose this apparatus to dripping or splashing, no objects filled with liquids, such as vases, should be placed on the apparatus. Before attempting to operate the unit, make sure that the timer recording mode is off. This product is in Stand-by mode when turned off while the mains cable is connected. Before moving the unit, be sure to remove any media and unplug the mains cable from the AC outlet. [. . . ] Select "Start Rec" using [K \ L], then press [ENTER\OK]. The dubbing will start. 6 40 EN E3TK6BD_EN. book Page 41 Wednesday, February 17, 2010 10:18 AM Available dubbing direction for copy-once programme: From To DVD-RW (VR) (CPRM-compatible) HDD (Internal) DVD-RW (VR) (Not CPRM-compatible) DVD-RW (video) DVD-R / +RW / +R Videotape HDD (Internal) DVD-RW (VR) Videotape HDD (Internal) Videotape DVD-RW (VR) (CPRM-compatible) DVD-RW (VR) (Not CPRM-compatible) DVD-R / +RW / +R V: Available [: Not available *1 The recorded programme moves. (Copy control signal will be recorded to the videotape. ) (Refer to page 28 for details about CPRM. ) V*1, *2 [ [ [ V*2 [ V*2 V V*2 [ · Duration of high speed dubbing will vary depending on the recording mode or the title amount. · High speed dubbing is not available when; - recording mode is set to other than "High". · High speed dubbing of an HDD title which has bilingual audio is only available to VR mode DVD-RW disc. "Auto" When "Auto" is selected as a recording mode, the unit calculates how much time is available on the disc and selects the best recording mode available automatically. · The recording may be cut short when the available recording space of the disc is too limited. Introduction Connections Basic Setup / TV View Operation Note [ · During normal dubbing, you can watch the playback picture of the title being dubbed (the audio cannot be changed). · When you dub an HDD title that has bilingual audio to video mode DVD-RW/-R or DVD+RW/+R disc, select an appropriate audio format in the "Bilingual Recording Audio" menu. · In order to dub a DVD recorded with the NTSC, set the "TV System" to "PAL". · If you stop the dubbing halfway, the contents will be dubbed up to where you stop the dubbing (except for the high speed dubbing). With high speed dubbing, nothing will be dubbed if you stop it halfway. · To stop the dubbing in progress, press [STOP C] (for HDD to DVD, DVD to HDD and VCR to HDD/DVD) or [STOP\EJECT C \ A] (for HDD/DVD to VCR) on the front panel or press [STOP C] for 2 seconds on the remote control. · If the title was in the resume stop mode, the dubbing will start from the beginning to the end of the resume stopped title. · When dubbing from HDD to DVD or VR mode DVD-RW to HDD, recording mode will automatically be set to "High" whenever the conditions are met. (See page 41. ) · If the high speed dubbing is not available, the title will be dubbed in normal speed with the recording mode of the title. · If the title is recorded in other brand's DVD recorder, the title will be dubbed in normal speed with the recording mode that you set with [REC MODE]. · If there is not enough space left on the disc for high/normal speed dubbing with the title's recording mode, the title will be dubbed in normal speed with "Auto" mode. If there is not enough space left on the disc for normal speed dubbing with SLP mode, the title will be dubbed in normal speed with SLP mode until the space of the disc runs out. · If you press [DUBBING HDD M DVD] on the front panel in stop mode without selecting any title, the unit will start dubbing the last title in the Original List or the Playlist. It will start dubbing the title in the Original List if the Original List was the last selected list. It will start dubbing the title in the Playlist if the Playlist was the last selected list. One Touch Dubbing from VCR to DVD One Touch Dubbing Video VR If you want to record a title in the videotape, press [VCR] first. 1 DVD-R HDD DVD-RW DVD-RW Press [PLAY B] to start the playback of the videotape you want to dub. Press [DUBBING VCR M DVD] on the front panel. The dubbing will start from there to the end. VCR DVD+RW DVD+R You can start dubbing right away with just one touch. 2 3 One Touch Dubbing between HDD and DVD To stop the dubbing in progress: Press [STOP C] on the front panel. If you want to record a title in a disc, press [DVD] first. Note · When dubbing starts, the video image may be distorted because of the Digital Tracking function. [. . . ] (See page 30. ) · Insert a recordable disc, and ensure the disc status satisfies the recording requirements. Recording Error This disc is protected and not recordable. · Insert a ver. 1. 2 DVD-RW disc (compatible with CPRM. ) · Remove the disc protect setting in "DVD Menu" menu. (See page 44. ) 80 EN E3TK6BD_EN. book Page 81 Wednesday, February 17, 2010 10:18 AM Introduction Error message Recording Error Disc is full. [. . . ]