User manual SUB-ZERO SZDESIGN GUIDE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SUB-ZERO SZDESIGN GUIDE. We hope that this SUB-ZERO SZDESIGN GUIDE user guide will be useful to you.
Manual abstract: user guide SUB-ZERO SZDESIGN GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] DESIGN GUIDE
B U I LT - I N
|
I N T E G R AT E D
|
W INE S TORAGE
|
U NDERCOUNTER
CONTENTS
Built-In Refrigeration Integrated Refrigeration Wine Storage Undercounter Refrigeration Warranty 4 31 50 67 75
Features and specifications indicated herein and on our website are subject to change at any time without notice. Check our website, subzero. com, for the most up-to-date specifications.
The information and images in this guide are the copyright property of Sub-Zero Freezer Company, Inc. Neither this book nor any information or images contained herein may be copied or used in whole or in part without the express written permission of Sub-Zero Freezer Company, Inc. all rights reserved.
SUB-ZERO ® is a registered trademark of Sub-Zero Freezer Company, Inc.
WELCOME TO SUB-ZERO We make the ultimate built-in, integrated and undercounter refrigerators, freezers and wine storage units. [. . . ] Also refer to the full-scale illustrations at the end of this section for specifics on door openings.
26 3/4"* (679)
PANEL WIDTH
(610)
24"
A
45 3/8"
(1153)
(2032)
80"*
79 7/8"*
(2029)
27" (686) WIDE MODELS
Installation of a 27" (686) wide Integrated base or tall unit within frameless cabinetry.
A
13 9/16"
(345)
A
*Dimensions may vary.
341/2"
(876)*
16 11/16"*
(424)
4"*
(102)
(686)
Dimensions are based on a 1/8" (3) reveal. A reveal of up to 1/4" (6) is possible, but panel dimensions need to be adjusted accordingly.
27" SIDE VIEW
TOE KICK
FINISHED OPENING
A) ALL REVEALS ARE 1/8" (3) *DIMENSIONS MAY VARY
35 3/4"* (908)
PANEL WIDTH
36" (914) WIDE MODELS
(610)
24"
A
Installation of a 36" (914) wide Integrated tall unit within frameless cabinetry.
*Dimensions may vary.
45 3/8" (1153)
(2032)
80"*
79 7/8"*
(2029)
Dimensions are based on a 1/8" (3) reveal. A reveal of up to 1/4" (6) is possible, but panel dimensions need to be adjusted accordingly.
A
13 9/16"
(345)
A
341/2"
(876)*
16 11/16"*
(424)
4"*
(102)
(914)
36" SIDE VIEW
TOE KICK
FINISHED OPENING
A) ALL REVEALS ARE 1/8" (3) *DIMENSIONS MAY VARY
43
PANEL CONSIDERATIONS The illustrations below provide panel width dimensions for installation of a single tall unit, 27" (686) and 36" (914) wide models. Illustrations on the following page provide panel width dimensions for installing two tall units side by side, 27" (686) wide models and 36" (914) wide models. IMPORTANT NOTE: The depth of each Integrated model is 24" (610) from the front of the unit to its back. You must allow for the thickness of the panel you are applying when planning for the finished rough opening depth if you want the front panel to be flush with surrounding cabinetry. You may have to move the unit back into drywall or bring the cabinets forward to achieve a flush fit.
I N S TA L L AT I O N
To install integrated panels, see the detailed procedures outlined in the Sub-Zero Integrated Installation Guide.
27" (686) WIDE MODELS
27
Panel width dimensions for installation of a 27" (686) wide tall unit.
* 1 (3) min 8 REVEAL
(686) 3 26 4 (679)
* 1 (3) min 8 REVEAL
3 4 (19) PANEL
Dimensions are based on a 1/8" (3) reveal. A reveal of up to 1/4" (6) is possible, but panel dimensions need to be adjusted accordingly.
25
(635)
7 25 8 (657)
25
(635)
CABINETRY OR SIDE PANEL
24
(610)
APPLIANCE DOOR WIDTH
TO BACK OF UNIT
CABINETRY OR SIDE PANEL
SUB-ZERO UNIT
*SUBTRACT PANEL WIDTH FROM CABINETRY OPENING TO DETERMINE ACTUAL WIDTH OF REVEAL
36" (914) WIDE MODELS
36
Panel width dimensions for installation of a 36" (914) wide tall unit.
* 1 (3) min 8 REVEAL
(914) 3 35 4 (908)
* 1 (3) min 8 REVEAL
3 4 (19) PANEL
Dimensions are based on a 1/8" (3) reveal. A reveal of up to 1/4" (6) is possible, but panel dimensions need to be adjusted accordingly.
25
(635)
7 34 8 (886)
25
(635)
CABINETRY OR SIDE PANEL
24
(610)
APPLIANCE DOOR WIDTH
TO BACK OF UNIT
CABINETRY OR SIDE PANEL
SUB-ZERO UNIT
*SUBTRACT PANEL WIDTH FROM CABINETRY OPENING TO DETERMINE ACTUAL WIDTH OF REVEAL
44
As the reveal between cabinets and the Integrated unit decreases, the potential exists for severe finger pinching or crushing if a hand or fingers are placed in the opening when the door is closing.
When 3/4" (19) or thicker panels are used and a reveal less than 1/4" (6) is maintained, the door panels may cause damage to the Sub-Zero unit when the door is open at the maximum 105° stop. You should use the built-in 90° stop to prevent damage.
PANEL REQUIREMENTS
Door and drawer panels must be a minimum of 5/8" (16) thick. The door panel cannot exceed 40 lbs (18 kg) and each drawer panel must not exceed 12 lbs (5 kg) for 27" (686) wide units. For 36" (914) wide units, the door panel weight limit is 53 lbs (24 kg) and 16 lbs (7 kg) for each drawer panel.
27" (686) WIDE MODELS
54 (1372)
* 1 (3) min 8 REVEAL
13 26 16 (681) 13 26 16 (681)
* 1 (3) min 8 REVEAL
3 4 (19) PANEL 3 4 (19) PANEL
* 1 (3) min 8 REVEAL
Panel width dimensions for installation of two 27" (686) wide tall units side by side.
25
(635)
25
(635)
CABINETRY OR SIDE PANEL
24
(610)
DOOR
DOOR
TO BACK OF UNIT
CABINETRY OR SIDE PANEL
Dimensions are based on a 1/8" (3) reveal. A reveal of up to 1/4" (6) is possible, but panel dimensions need to be adjusted accordingly.
SUB-ZERO UNIT
SUB-ZERO UNIT
*SUBTRACT PANEL WIDTH FROM CABINETRY OPENING TO DETERMINE ACTUAL WIDTH OF REVEAL
36" (914) WIDE MODELS
72 (1829)
* 1 (3) min 8 REVEAL
13 35 16 (910) 13 35 16 (910)
* 1 (3) min 8 REVEAL
3 4 (19) PANEL 3 4 (19) PANEL
* 1 (3) min 8 REVEAL
Panel width dimensions for installation of two 36" (914) wide tall units side by side.
25
(635)
25
(635)
CABINETRY OR SIDE PANEL
24
(610)
DOOR
DOOR
TO BACK OF UNIT
CABINETRY OR SIDE PANEL
Dimensions are based on a 1/8" (3) reveal. A reveal of up to 1/4" (6) is possible, but panel dimensions need to be adjusted accordingly.
SUB-ZERO UNIT
SUB-ZERO UNIT
*SUBTRACT PANEL WIDTH FROM CABINETRY OPENING TO DETERMINE ACTUAL WIDTH OF REVEAL
Dimensions are in inches with millimeters in parentheses unless otherwise specified.
45
INSTALLATION OPTIONS The illustrations show some typical installations and their dimension considerations. The depth dimension in the illustrations may vary depending on cabinet styles, treatment of countertops or other design options. IMPORTANT NOTE: The depth of each Integrated model is 24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back or cabinets forward to achieve a flush fit. NOTE: In the Installation Options illustrations, the first width dimension shown is for 27" (686) wide units and the second dimension is for 36" (914) wide units.
25
CABINETS
25
(635)
27
(686)
OR
36
(914)
ACCESSORIES
Optional accessories are available through your Sub-Zero dealer. To obtain local dealer information, visit the Locator section of our website, subzero. com.
TOP VIEW
Installation without side panels
CABINETS
DUAL INSTALLATIONS If two or more Integrated models are installed side by side where there is 2" (51) or less of space between the units, a heater kit is recommended--TTDUAL for two tall units installed side by side and BBDUAL for two base units or a base unit and a tall unit installed side by side. These optional components are available through your Sub-Zero dealer.
(635)
27
(686)
OR
36
(914)
5 MINIMUM 8 (16) SIDE PANELS
Installation with side panels
CABINETS
25
(635)
OR (1829)) (1372))) )
54
72
TOP VIEW
S E R V I C E I N F O R M AT I O N
Sub-Zero Freezer Co. , Inc. Box 44130 Madison, WI 53744-4130 Service line: 800-222-7820 Website: subzero. com
Installation of two units side by side
CABINETS
25
(635)
If you need service, you can reach the Sub-Zero service line 24 hours a day, seven days a week, by calling 800-222-7820. You may also check the Service Center Locator section of our website, subzero. com. [. . . ] Refer to the installation instructions packaged with the unit to understand how the panel is installed. Door panel dimensions are 15" (381) wide by 30 3/8" (772) high and must be a minimum of 5/8" (16) thick. No handle recess is required.
F R A M E D PA N E L S P E C I F I C AT I O N S
Undercounter Models
Framed Door Panel Model 249RP Model 249FF(I) Model 245 Model 249R
W 23 5/8" (600) 23 5/8" (600) 23 1/2" (597) 23 5/8" (600)
H 30" (762) 30" (762) 28 1/8" (714) 30" (762)
O V E R L AY PA N E L S P E C I F I C AT I O N S
Models 249RP 249FF(I) and 249R ,
Overlay Door Panels Overlay Panel Spacer Panel Backer Panel
W 24" (610) 23" (584) 23 5/8" (600)
H 30 5/16" (770) 29 3/8" (746) 30" (762)
PANELS 1/4" (6) THICK OR LESS
PANELS THICKER THAN 1/4" (6)
Trim reveal 1/4" (6) min
Trim reveal 1/4" (6) min Rout to 1/4" (6) thickness
OVERLAY PANEL Rear View
1/8" (3) 5/16" (8)
4"(102) 15"
(381)
H
1/4" (6)
Panel
1"
W
Illus. 3
Notch Required for Hinge Clearance (top and bottom)
(25)
Illus. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SUB-ZERO SZDESIGN GUIDE
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SUB-ZERO SZDESIGN GUIDE will begin.