User manual SUB-ZERO 427R-PS

[. . . ] ANTI-TIP BRACKET* 13 1/2" (343) (635) 25" (686) 27" (635) 25" LOCATE ELECTRICAL WITHIN SHADED AREA ­ ORIENT GROUND PRONG TO RIGHT AS SHOWN ANTI-TIP BRACKET (2032) 80" 4 1/2" (114) 1/4" (6) 13" (330) 2 1/2" (64) 15 1/2" (394) NOTE: ANTI-TIP BRACKET MUST BE INSTALLED TO PREVENT UNIT FROM TIPPING FORWARD ANTI-TIP BRACKET FRONT VIEW SIDE VIEW DIMENSIONS Finished Rough Opening Width Finished Rough Opening Height Finished Rough Opening Depth Location of Electrical 27" (686) 80" (2032) 25" (635)* Within shaded area * The depth of the Model 427R is 24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back, or cabinets forward to achieve a flush fit. See Installation Instructions shipped with unit for detailed specifications. Dimensions in parentheses are in millimeters unless otherwise specified. 4 Planning Information Wine Storage Model 427R I N S TA L L AT I O N N OT E S Refer to the illustrations and specifications for overall dimensions, finished rough opening dimensions and installation specifics. [. . . ] Locate electrical within the shaded area shown in the installation illustration on page 4. In addition, be aware of local codes and ordinances when installing your service. Refer to the Wine Storage Installation Instructions packed with the appliance, which provides step-by-step procedures for making sure the unit is installed properly. Dimensions in parentheses are in millimeters unless otherwise specified. 5 Planning Information Wine Storage Model 427R I N T E G R AT I N G C A B I N E T RY Unless you are installing a stainless steel unit, you will need to provide a full door panel in the instance of a solid door unit, or a frame for the glass door application, where wine will be seen from the outside. If you order a stainless steel Model 427R, you will need to have the stainless steel panels and handles installed. A solid panel must not be installed on a glass door unit, as this may cause moisture to form behind the panel. I N T E G R AT E D PA N E L S If you are familiar with our Integrated line and its panel applications, this section will be relatively easy to understand. The Wine Storage solid door panels or frame panels for glass doors will follow some of the identical planning processes you learned with the Integrated line. Rather than using the mounting hardware we used with the Integrated units, the door panel for Model 427R will be attached with screws applied through our door. The drawer panels for the Model 427R will be applied using the Integrated technique of mounting brackets. IMPORTANT NOTE: The depth of Model 427R is 24" (610) from the front of the unit to its back. You MUST allow for the thickness of the panel you are applying when planning for the finished rough opening depth if you want the front panel to be flush with surrounding cabinetry. You may have to move the unit back into drywall or bring the cabinets forward. The glass door opening of the standard Model 427R is designed to be exposed to room air circulation. While the cabinet front stiles are a minimum of 2 1/4" (57), the top and bottom rails are different. Rails and stiles can be increased in size but should not exceed cabinet manufacturers standard width. They cannot exceed overall door panel dimensions specified, as they would interfere with the operation of the door. The back sides of rails and stiles that will be visible through the glass door will need to be finished. When ordering panels for a solid door unit, follow the overall panel dimensions indicated in the chart, rail and stile dimensions do not apply. Door Panel Weight Limit Top Drawer Panel (W x H) 26 3/4" (679) x 45 3/8" (1153) 3 3/4" (95) min 3" (76) min 2 1/4" (57) min Glass Door ­ 20 lbs (9 kg) Solid Door ­ 40 lbs (18 kg) 26 3/4" (679) x 13 9/16" (345) Bottom Drawer Panel (W x H) 4" (102) toe kick ­ 26 3/4" (679) x 16 11/16" (424) 6" (152) toe kick ­ 26 3/4" (679) x 14 11/16" (373) Drawer Panel Weight Limit Panel Thickness 12 lbs (5 kg) each 5/8" (16) min A solid panel must not be installed on a glass door unit, as this may cause moisture to form behind the panel. MODEL 427R CABINETRY DIMENSIONS 27 (686) 24 (610) FINISHED OPENING 3 26 4 (679) DOOR PANEL (UNIT DIMENSION) 3 45 8 (1153) 80 (2032) FINISHED OPENING 1 8 (3) 7 79 8 (2029) TRIMMED DOOR 9 1316 1 8 (345) (3) 26 3 (679) 4 DRAWER PANEL 1 *34 2 (877) 11 1616 (424) 4 (102) 4 (102) TOE KICK FRONT VIEW TOE KICK SIDE VIEW 1 * 2 INCH (13) ADJUSTMENT IN LEVELING LEGS Cabinetry dimensions shown in the standard full-view glass door application. Dimensions in parentheses are in millimeters unless otherwise specified. 8 Planning Information Wine Storage Model 427R F R A M E D C A B I N E T RY A P P L I C AT I O N S FRAMED CABINETRY Framed cabinetry applications present you with different questions to address. The illustrations on this page show common applications of framed cabinetry. These are not meant to be the only alternatives, but are suggestions from designers around the country. Also refer to the full-scale illustrations at the end of this section for specifics on door openings. [. . . ] If you choose to stain or seal the wood facing, be aware that some of these substances are hazardous and will damage stored wine. Dimensions in parentheses are in millimeters unless otherwise specified. 12 Planning Information Wine Storage Model 427R WINE STORAGE DOOR FRAME Glass C L Cabinet Door Profile 7/8" (22) 7/8" (22) 2 1/4" (57) Rail / Stile DOOR FRAME PROFILE F U L L - S C A L E T E M P L AT E The full-scale illustrations on this page and the following page enables you to understand some of the unique situations you may face as you design the Wine Storage units into homes. These templates can be easily photocopied or used in your tracings. The full-scale illustration above is typical of the Model 424 door frame profile, details of the other Wine Storage door frames will vary slightly. IMPORTANT NOTE: Rails and stiles must be wide enough to cover the door hinges. The back sides of rails and stiles that will be visible through the glass door will need to be finished. Dimensions in parentheses are in millimeters unless otherwise specified. 13 Planning Information Wine Storage Model 427R WINE SHELF WOOD FACING 5/8" (16) 7/64" (3) Maximum Thickness 11/2" (38) 27/32" (21) 5/64" (2) 2015/16" (532) WIDTH 23/64" (9) 9/16" (14) FRONT VIEW SIDE VIEW F U L L - S C A L E T E M P L AT E Use the full-scale illustration above as a template if you choose to replace the natural cherry wood facing with wood more complementary to your design and surrounding cabinetry. Dimensions in parentheses are in millimeters unless otherwise specified. 14 Planning Information Wine Storage Model 427R SUB-ZERO DOOR FRAMED CABINETRY IMPORTANT NOTE: The depth of the Model 427R is 24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back, or cabinets forward to achieve a flush fit. T 24 (610) TO BACK OF UNIT LINE OF INTERFERENCE* LINE OF INTERFERENCE* AT MAXIMUM DOOR OPENING 1 (3) MIN. [. . . ]