User manual STUV 30

[. . . ] Consequently, take care when handling the appliance when it is being fitted. When lighting the fire for the first time, some unpleasant smoke or smells may be released. Before lighting your stove for the first time, make sure you have removed the canister of spray-paint from the combustion chamber or the ash pan. Of the fireplace which can be seen on the main frame of the appliance, in the middle, above the ashpan in the sold door position (photo 3A) and send a copy of the final inspection card for the fireplace. [. . . ] To re-assemble the fireplace, you need only carry out the stripping operations in the opposite direction, i. ­ Caution : - first, fit the front lug of the base into the panel (photo 47), - swivel the facing to insert the rear pin, ­ fix the upper part. You have chosen a Stûv fireplace ; Concept & Forme thanks you for doing so. This fireplace was designed to offer you maximum pleasure, comfort and safety. We recommend that you should : - entrust its installation (or at any rate its inspection) to a skilled professional, - carefully read these directions for use and comply with the cleaning instructions, - duly fill in the certificate of guarantee and return it to us, while clearly mentioning the manufacturer's no. , which can be seen on the main frame of the appliance, in the middle, above the ashpan in the sold door position (photo 2), - have the flue swept at regular intervals (once a heating season, for regular use) in order to ensure optimum operation and maximum safety. - The paint is not oven-baked and it is therefore relatively fragile but will harden when it is heated for the first few times. Consequently, take care when handling the appliance when it is being fitted. - A paint spray supplied with the appliance allows you to touch up the paintwork, if necessary. Before lighting your stove for the first time, make sure you have removed the canister of spray-paint from the combustion chamber or the ash pan. - When lighting the fire for the first time, some unpleasant smoke or smells may be released. Different species of wood have different heat capacities and they do not all burn in the same way. Generally speaking, you should opt for hard wood such as oak, beech, ash, hornbeam or fruit trees. They provide lovely flames and a lot of embers which will glow for a long, long time. Damp wood heats a great deal less: a best part of energy is only used to evaporate the water that it contains. The sapwood ­ as the soft wood just beneath the bark is called ­ can contain up to 75% water. Furthermore, moist wood releases a lot of smoke and not many flames and it causes the fireplace, its window and the chimney to get dirty and soot up. The wood should be covered or sheltered from the rain, but well ventilated. Generally speaking, you should allow two years for the wood to dry properly. You will learn to estimate the extent of drying from experience by weighing the logs in your hand. The drier they are, the lighter they are and they make a clearer sound when you knock them together. Wood never to be used Wood which has been treated with chemicals, railway sleepers, or fibreboard, which are quick to dirty the appliance and soot up the chimney and may also give off toxic fumes. [. . . ] ) years on other components (base grate, door mechanism, hinges, pulleys, runners, clasps, . Only the sales invoice produced by the distributor for the final purchaser is valid as proof for the guarantee. The right to benefit from extension of the guarantee is subject to adherence to the applicable conditions and the accuracy of the information provided to Stûv. Stûv stoves are guaranteed against : ­ manufacturing faults, ­ faults with the paintwork on the visible external parts of the stove As a user, you also have an important role to play in ensuring you get the best out of your Stûv. [. . . ]