User manual STUV 16-H

[. . . ] This accessory has been designed to offer you maximum comfort and safety. If however you should find the slightest dissatisfaction with it, please contact your supplier. Read the installation instructions and directions for use before installation and actual usage. [. . . ] The paint of the base is not ovenbaked and is therefore relatively fragile. ­ 1 base (for 16/58 : ref 13010012, for 16/68 : ref 13010013, for 16/78 : ref 13010014) ­ 4 x M6x16 screws with hexagonal head Optional : outside air inlet for 16-cube base : ­ 1 air inlet duct ­ 1 union ­ 1 piece of flexible tubing ­ 2 clamp collars ­ 4 M4 nuts Using a size 3 Allen key, remove the plug from the air inlet and the flaps at the front and back of the support plate [photos 1 & 2]. remove the packaging from the base of the Stûv 16-cube [photo 3]. Using the screwdriver (T x 20 head), unscrew the base from the wooden palette [photo 4]. Put protection on the floor and turn the base on its back and screw the 4 adjustable legs tight to the base [photo 5]. Using a hammer, remove the lower or back plug from the base depending on the configuration required [photo 6]. do the same for the air inlet duct depending on the configuration required [photo 7]. Feed the flexible tubing of the air inlet into the hole in the base [photo 8]. In case of back airflow, recover the cap you removed from the base in item [6], and put it on the precut at the base's bottom (between the channel and the base). Ensure the union, which fits into the duct, is fully inserted [photo 11]. For the distance at the front, refer to the installation instructions for the Stûv 16-cube. Pre-screw - screw in the M6x16 screws with hexagonal heads without tightening in order to be able to adjust the parts [photo 1]. Using the M5x12 screws with hexagonal heads, screw in the 2 link lugs at the front ­ left and right ­ [photo 3]. Retighten the rotation axis and attach with the 2 M5x12 screws with hexagonal heads. [. . . ] Com installation | installatie | installazione | instalación | instalação | instalace | installation | installatie | installazione | instalación | instalação | instalace | installation | installatie | installazione | instalación | instalação | instalace | installation | installatie | installazione | instalación | instalação | instalace | installation | installatie | installazione | instalaciónand | instalace | installation installatie | installazione | instalación Stûv stoves are designed | instalação Stûv reserves the right to make| changes without prior notice. These instructions | instalação |manufactured|in Belgium by | installatie |been produced with instalación |care. However, we do not accept instalace installation have installazione | the greatest of instalação | instalace | installation | installatie |sa installazione | instalación | instalação for any | instalace | installation | installatie | installazione | instalaresponsibility ción | Stûv instalação | instalace | installation | installatie |errors that may have instalación | instalação | instalace | installazione | been made. [. . . ]