User manual STOKKE HARNESS

[. . . ] Cleaning and maintenance Wipe with a clean damp cloth, wipe off excess of water with a dry cloth. The varnish contains no harmful substances, and the liberation of formaldehyde from the varnish complies with E1 requirements. Safety approval Tripp Trapp® high chair assembled with Tripp Trapp® Baby SetTM complies with EN 14988:2006 RIGHT OF COMPLAINT The customer has a right of complaint pursuant to the consumer protection legislation applicable at any given time, which legislation may vary from country to country. Generally speaking, STOKKE AS does not grant any additional rights over and above those laid down by the legislation applicable at any given time, although reference is made to the "Extended Warranty" described below. [. . . ] Upon registration, a warranty certificate will be issued and sent to the customer electronically (e-mail) or by ordinary mail. The product only having been used for the purpose for which the product is intended. Upon the "Extended Warranty" being invoked, the warranty certificate shall be presented, together with the original date-stamped purchase receipt. The product appearing in its original state, hereunder that the only parts used have been supplied by STOKKE® and are intended for use on, or together with, the product. Any deviations herefrom require the prior written consent of STOKKE®. The serial number of the product not having been destroyed or removed. The STOKKE® "Extended Warranty" does not cover: Damage caused by normal developments in the parts making up the product (e. Damage caused by accidents/mishaps ­ for example any other objects having bumped into the product or any person having overturned the product by colliding with it. The same applies if the product has been overloaded, for example in terms of the weight placed on it. Damage inflicted on the product by external influence, for example when the product is being shipped as luggage. Consequential damage, for example damage inflicted on any persons and/or any other objects. When the footrest is positioned close to the metal rod, there will be a small gap between the inside of the chair legs and the metal rod. Never try to use excessive force to make the metal rod touch the side legs of the chair as this can cause damage to the chair and/or make it unstable. Consequently, the "Extended Warranty" may be invoked by whoever is the owner of the product any given time, within the warranty period, and subject to the warranty certificate being presented by the owner. Table Be aware of the risk that a big frame under the table top makes it easier for children to push their legs against the table and tilt backwards. Footrest Make sure the forward edge of the footrest NEVER protrudes beyond the front tip of the chair legs at floor level. This may cause the chair to be unstable when a child climbs in and out of the Tripp Trapp® high chair. Their function is to make the high chair slide backwards and return to an upright position when lifted from the floor in front. To make sure that the gliders function as intended, the high chair should be placed on a surface that doesn't inhibit it from sliding backwards. That means that the surface should be level, stable and with a certain hardness. Carpets and rugs that are soft or with long loose ends that the high chair could sink into, is an unsuitable surface for your Tripp Trapp® high chair. Uneven floors, like some tiled floors could be are also an unsuitable surface for your Tripp Trapp® high chair. [. . . ] STOKKE® Harness 4 point harness with attachment brackets that fits your Tripp Trapp® high chair. Plasser alltid stolen på en plan overflate og påse at det er plass til at stolen kan skyves bakover. For å sikre at plastgliderne fungerer som de skal, må stolen settes på et underlag som gjør det mulig for stolen å gli bakover. DREPTUL DE FORMULARE A RECLAMAIILOR Conform legislaiei privind protecia consumatorului aplicabil în orice moment, legislaie care poate varia de la o ar la alta, clientul are dreptul de a formula reclamaii. [. . . ]