User manual STARNEX SELF-GUARD SG-3000

[. . . ] The Smallest, Wireless, Mobile, and Covert DVR in the World Unpacking Check to make sure that all of the items shown below are included with your Self- SELF-GUARDTM (Professional Version: SG-1000, SG-2000, and SG-3000) Guard. If something is missing, contact your dealer as soon as possible. User's Guide Thank you for purchasing this Self-Guard product. Before using it, be sure to read the precautions contained in the User's Guide. For the most up-to date information about this product, visit our official website at http://www. STARNEXinternational. com/. ­ Contents ­ F. [. . . ] SIZE (Image Resolution for Recording) This function adjusts the resolution of images. The ranges of the resolution are 128x128, 160x128, 240x240, 320x240, 480x480, and 640x480 pixels. OVERWRITE (Overwrite when memory is full) O O O O O X O O O O X O X O X O O O O O ALL EDIT CLEAR SAVE If you set this Overwrite function to on, then the oldest file in dates gets replaced by the new file being recorded, enabling the Self-Guard to continue to record when the memory is full. If this function is off, and the memory is full with the existing files, then the Self-Guard stops from recording the images, and returns back to the initial menu mode, displaying "STOP!OPTION" mode "F. OHERS" ALL: Select all blocks CLEAR: Cancel all blocks EDIT: Select/Cancel blocks 43 44 "c. POWER SET") is not set to "0 minute" but instead, set to "1-9 minutes", then the Self-Guard automatically turns off its power after the selected time has elapsed. BUILT-IN Types of Memory Built-in Flash Memory RS-MMC Additional Memory Card USB USB Memory Stick or USB Hard Disk 1. ALL DAY : ON 08-11 : OFF 11-14 : OFF 14-17 : OFF 17-20 : OFF EDIT Memory Usage Sequence when "OVERWRITE" is "ON" BUILT-IN O O O O RS-MMC O O USB O O Memory Usage Sequence BUILT-IN BUILT-IN BUILT-IN RS-MMC BUILT-IN BUILT-IN USB BUILT-IN BUILT-IN RS-MMC USB BUILT-IN 1. ALL DAY If you turn on this option, then the Self-Guard records for 24 hours, all day long continuously. You can change for the time using direction buttons. Memory Usage Sequence when "OVERWRITE" is "OFF" BUILT-IN O O O O e. SCHEDULE You can program the Self-Guard to reserve recording time schedule in 4 time frames for a day. If you turn off all options in the schedule menu, then the Self-Guard turns on "1. ALL DAY" automatically. If you go into the Record Mode outside of the preset recording time, then the LCD displays with "CHECK SCHEDULE" message for 5 seconds, and goes into the sleep mode. When the time becomes for the preset time schedule, Self-Guard exits from the Sleep mode and starts to record. If you press [ESC] or [ENT] when the Self-Guard is in the sleep mode, then the LCD will display with a message, "CHECK SCHEDULE" for 5 seconds. During this message is displayed on the LCD, if you press [ESC], then Self-Guard exits from the sleep mode and goes into the menu mode. If you do not press [ESC] for that 5 seconds, then the Self-Guard keeps its sleep mode. RS-MMC O O USB O O Memory Usage Sequence BUILT-IN Stop BUILT-IN RS-MMC Stop BUILT-IN USB Stop BUILT-IN RS-MMC USB Stop 08-11 (08:00 ­ 10:59) 3. SEARCH SET You can select one from the 8 options (OFF, BT1 ­ BT7). BT AUDIO", then the Self-Guard does not play the audio recorded by the slave Self-Guard A. CAMERA SET B. RECORD SET C. SEARCH SET D. DATE/TIME SET E. REMOTE SET F. SENSOR SET G. USB SET H. MEMORY SET I. OTHERS via Bluetooth. If you select one from BT1 to BT7, then "b. AUDIO" automatically becomes "OFF", and the audio from a Bluetooth channel gets played. If "c. BT AUDIO" is OFF and "b. AUDIO" is ON, then the Self-Guard play the audio recorded by the microphone. If you turn off both for the "b. AUDIO" and "c. BT AUDIO", then only the video will play without the audio. [. . . ] When you don't need to access the LAN, select "a. LAN" from the menu "E. REMOTE SET" of the menu "OPTION", and set it off. When you are not using the Bluetooth function, set "POWER" to off from the menu "BLUETOOTH". If there exists some external cameras, which you are not using, then set off all those cameras from the menu "CAMERA SET" of the menu "OPTION". If I connect the Self-Guard with the docking station or the adaptor, then the Self-Guard turns on its power automatically. [. . . ]