User manual SRAM 5.4

[. . . ] Program P2: This program has the same features as P1, but with different time and day settings, see following table. program P3: It is possible to customize , the time and day settings; programm the values of the reference temperatures (Tmin and Tmax). Moreover it is possible to activate the frost protection (indicated with ) which keeps the ambient temperature over 7°C. [. . . ] NOTE: To program Tmin or Tmax means that starting from the programmed time the thermostat operates so that the ambient assumes the programmed reference temperature value. ) * = seulement pour le programme P3 TECLAS + avance (presión continua = avance rápido) - retroceso (presión continua = retroceso rápido) Nota: en los programas P1, P2 y P3, apretando el pulsador +, se introduce la Tmax, apretando el pulsador -, se introduce la Tmin (mando manual) M memorización P preparado para la programación S selección de programas P + M Puesta a cero del aparato (reset). KEYS + Advance (long pressure = quick advancing) - Downward (long pressure = quick reverting) Note: With programs P1, P2, P3 pressing the key +, Tmax is activated, pressing the key - Tmin is activated (Manual operation) M Store P Preparation for programming S Selection of program P+M Delete memory (reset) DISPLAY INDICATIONS 1 - Day of the week (DAY 1 = Monday; DAY 2 = Tuesday etc. ) 2 - Indication of the max or min temperature with the programs P1, P2, P3 3 - Value of the programmed temperature 4 - Value of the ambient temperature (for the values > 40°C and < 5°C flashing indication) 5 - Programming in course (does not appear with the program MAN) *6 - Copying program 7 - Program selected (MAN, P1, P2, P3) 8 - Setting of time in course 9 - Exit ON/OFF 10 - Hour- minutes *11 - Frost protection activated *12 - Programming step (ON1, OFF1, ON2, OFF2 etc. By pressing the key M the set data is stored, and the program advances automatically to the next step. Attention: The programming is automatically annulled if the keys are not operated within 30". Press the key + to advance or the key - to go back, until the requested time appears (for instance 14 o'clock) store with the key M. NOTE With Tmin or Tmax it is possible to set a minimum or a maximum temperature for time intervals which may last several hours. The time thermostat controls that the room temperature is kept at either the minimum or maximum value, depending on the hour. Is set on a minimum temperature of 17°C and should the room temperature drop below this value, the heating system is turned on in order to go back to the minimum set value. If the heating system has to be kept totally off in the time intervals set at the minimum temperature, the latter has to be set at a lower value than the one that may be reached in the room. COPYING FUNCTION After programming the first day, the same program may be copied for the second day. For the other programs press P and then several times S; the display repeats the sequence of the stored data. It is possible to change the flashing numbers appearing on the display according to the procedure used for programming. [. . . ] For the other programs press P and then several times S; the display repeats the sequence of the stored data. It is possible to change the flashing numbers appearing on the display according to the procedure used for programming. TO DELETE A TIME SETTING IN PROGRAM P3 Select the time setting to be deleted pressing P and then several times S. [. . . ]