User manual SOUNDCRAFT SI SERIES V2.4 PATCHING USER GUIDE ADDENDUM
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SOUNDCRAFT SI SERIES V2.4 PATCHING. We hope that this SOUNDCRAFT SI SERIES V2.4 PATCHING user guide will be useful to you.
 |
SOUNDCRAFT SI SERIES V2.4 PATCHING USER GUIDE ADDENDUM: Download the complete user guide (285 Ko) |
Manual abstract: user guide SOUNDCRAFT SI SERIES V2.4 PATCHINGUSER GUIDE ADDENDUM
Detailed instructions for use are in the User's Guide.
[. . . ] [. . . ] Highlight your chosen source Analogue or Digital and press the encoder again to confirm your selection.
Changing Direct Out Source: The channel Direct Out may be sourced with either PRE or POST options (POST implies the source is fed through that channels High Pass & Low Pass filters) as follows: 1. From the main menu Select , , Inputs menu, scroll down to the Direct Out Pre/Post 2. Highlight your chosen source Pre Filter, or Post Filter, and press the encoder again to confirm your selection
Swapping Direct Out/Bus Out destinations: The Channel Direct Out / Bus Out may be , , swapped to allow bus outputs to be routed to the option slot. Nominally the direct outputs from the channels are routed to the option slot and the bus outputs are routed to the analogue bus outputs. [. . . ] [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SOUNDCRAFT SI SERIES V2.4 PATCHING
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SOUNDCRAFT SI SERIES V2.4 PATCHING will begin.