User manual SOUNDCRAFT DELTA 8 V4

[. . . ] Destinations for direct and bus outputs may be selected in a similar manner. [. . . ] Destinations for direct and bus outputs may be selected in a similar manner. Default Routing: Routing options are currently restricted to a 1:1 mapping, using the following scheme: Si3 Inputs Layer A - Left A - Right B - Left B ­ Right Si2 Inputs Layer A A B B Si1 Inputs Layer A B C Faders 1-16 1-16 1-16 1-16 Analogue Source Mic A 1-16 Mic B 1-16 Mic C 1-16 Mic D 1-16 Alt Digital Source Option Slot Channels 1-16 Option Slot Channels 17-32 Option Slot Channels 33-48 Option Slot Channels 49-64 Faders 1-16 17-24 1-16 17-24 Analogue Source Mic A 1-16 Mic B 1-8 Mic B 9-16, Mic C 1-8 Mic C 9-16 Alt Digital Source Option Slot Channels 1-16 Option Slot Channels 17-24 Option Slot Channels 25-40 Option Slot Channels 41-48 Faders 1-16 1-16 1-16 Analogue Source Mic A 1-16 Mic B 1-16 Optional Mic C 1-16 Alt Digital Source Option Slot Channels 1-16 Option Slot Channels 17-32 Option Slot Channels 33-48 Si3 Direct Out *1 Layer Faders A - Left 1-8 A - Left 9-16 A - Right 1-8 A - Right 9-16 B - Left 1-8 B - Left 9-16 B - Right 1-8 B - Right 9-16 Si2 Direct Out *1 Layer Faders A 1-8 A 9-16 A 17-24 B 1-8 B 9-16 B 17-24 Si1 Direct Out *1 Layer Faders A 1-8 A 9-16 B 1-8 B 9-16 C 1-8 C 9-16 Digital Destination Option Slot Channels 1-8 Option Slot Channels 9-16 Option Slot Channels 17-24 Option Slot Channels 25-32 Option Slot Channels 33-40 Option Slot Channels 41-48 Option Slot Channels 49-56 Option Slot Channels 57-64 Alt Analogue Destination Analogue Bus Out A 1-8 Analogue Bus Out B 1-8 Analogue Bus Out C 1-8 Analogue Bus Out D 1-8 Digital Destination Option Slot Channels 1-8 Option Slot Channels 9-16 Option Slot Channels 17-24 Option Slot Channels 25-32 Option Slot Channels 33-40 Option Slot Channels 41-48 Alt Analogue Destination Analogue Bus Out A 1-8 Analogue Bus Out B 1-8 Analogue Bus Out C 1-8 Analogue Bus Out D 1-8 Digital Destination Option Slot Channels 1-8 Option Slot Channels 9-16 Option Slot Channels 17-24 Option Slot Channels 25-32 Option Slot Channels 33-40 Option Slot Channels 41-48 Alt Analogue Destination Analogue Bus Out A 1-8 Analogue Bus Out B 1-8 Si Series Master Outputs *1 Layer Faders Analogue Destination 1-12 1-8 Analogue Bus Out A 1-8 1-12 9-12 Analogue Bus Out B 1-4 12-24 1-4 Analogue Bus Out B 5-8 12-24 5-12 Analogue Bus Out C 1-8 MTX/MST 1-8 Analogue Bus Out D 1-8 MTX/MST 10-12 Master Bus Out L, R & C Alt Digital Destination Option Slot Channels 1-8 Option Slot Channels 9-12 Option Slot Channels 13-16 Option Slot Channels 17-24 Option Slot Channels 25-32 *1 Direct Output destinations , , swap with Bus Output destination when a Bus Out is designated as , , Digital. Operation: Changing Input Source: Routing options are currently restricted to a 1:1 mapping, using the following scheme: 1. From the main menu Select , , Inputs menu, scroll down to the Input Source line and press the ADJUST encoder to open the source selection. From the main menu Select , , Outputs menu and scroll down to the Output Destination field. Highlight your chosen destination "Analogue output" or "Digital output", and press the encoder again to confirm your selection NOTE: Matrix Outputs are managed in a similar manner however, as there are fewer , , options, the view is slightly different (as shown below) but the principle is identical. Known Patching Bugs in V2. 4: Direct Out from Channels 33-40 will be , , silence if selected POST FILTER. [. . . ] From the main menu Select , , Outputs menu and scroll down to the Output Destination field. [. . . ]