User manual SONY WEGA KE-42M1

[. . . ] 2-021-773-11 (1) Flat Panel Color TV Operating Instructions KE-42M1 © 2004 Sony Corporation Owner's Record The model and serial numbers are located at the rear of the TV. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No. Contacting Sony If, after reading the following instructions, you have additional questions related to the use of your Sony TV, please call one of the following numbers. Customers in the continental United States contact the Direct Response Center at: 1-800-222-SONY (7669) Customers in Canada contact the Customer Relations Center at: 1-877-899-SONY (7669) 2 WARNING To reduce the risk of fire or shock hazard, do not expose the TV to rain or moisture. NOTIFICATION This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. [. . . ] (Audio) menu is set to "Variable, " "Speaker" is to "Off, " · When "Audio Out" in the check if the speaker volume is moderate before switching "Speaker" from "Off" to "On. " Otherwise, the speaker volume may get too loud. 26 Connecting a DVD Player with Component Video Connectors Use this hookup if: · Your DVD player has component (Y, PB, PR) jacks. Disconnect all power sources before making any connections. 1 Using a component video cable, connect the DVD player's Y, PB and PR jacks to the Y, PB and PR jacks on the TV. Use the HD/DVD IN 4 connections. Tip The Y, PB and PR jacks on your DVD player are sometimes labeled as Y, CB and CR, or Y, B-Y and R-Y. If so, connect the cables to the matching colors. Connecting and Setting the TV 2 Using an AUDIO cable, connect the DVD player's AUDIO OUT jacks to the TV's AUDIO IN jacks. Note The Y, PB and PR jacks do not provide audio, so audio cables must be connected to provide sound. Y PB PR Rear of TV 1 S VIDEO VIDEO IN 3 HD/DVD IN 4 Y PB VIDEO L(MONO) AUDIO R PR L AUDIO CENTER SPEAKER IN 180W (6 ) MAX AUDIO OUT (VAR/FIX) R L(MONO) AUDIO R AUDIO-L (white) AUDIO cable (not supplied) AUDIO-R (red) Component video cable (not supplied) DVD player Tips · To take advantage of the Wide Screen Modes, set the aspect ratio of the output signal to 16:9 on your DVD player. For details, refer to the operating instructions supplied with your DVD player. · Some DVD players are equipped with the three component video connectors: Y - Green, PB (CB, Cb or B-Y) - Blue and PR (CR, Cr or R-Y) - Red. 27 Connecting a DVD Player with S Video and Audio Connectors Use this hookup if: · Your DVD player does not have component (Y, PB, PR) jacks. Tip If your DVD player has component video output connectors, for best picture quality, use the connection described on page 27. The Y, PB and PR jacks on your DVD player are sometimes labeled as Y, CB and CR, or Y, B-Y and R-Y. If so, connect the cables to the matching colors. Disconnect all power sources before making any connections. 1 2 Using an AUDIO cable, connect the DVD player's AUDIO OUT jacks to the TV's AUDIO IN jacks. Using an S VIDEO cable, connect the DVD player's S VIDEO OUT jack to the TV's S VIDEO IN jack (VIDEO IN 1 or 3). Rear of TV 1 VIDEO IN 3 HD/DVD IN 4 Y PB VIDEO L(MONO) AUDIO R PR L AUDIO S VIDEO S VIDEO S VIDEO cable (not supplied) VIDEO (yellow) AUDIO-L (white) CENTER SPEAKER IN 180W (6 ) MAX AUDIO OUT (VAR/FIX) AUDIO cable (not supplied) R L(MONO) AUDIO R AUDIO-R (red) DVD player Note When you connect video equipment to both the VIDEO and the S VIDEO input jacks, make sure "Auto YC" in the (Setup) menu is set to "On" to view the S VIDEO input (see page 23). Tips · You can also use the VIDEO IN 2 jacks located on the front of the TV to connect your DVD player. · To take advantage of the Wide Screen Modes, set the aspect ratio of the output signal to 16:9 on your DVD player. For details, refer to the operating instructions supplied with your DVD player. · Use VIDEO 1/2/3 on the remote control to switch to the DVD player input. · If your DVD player is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable. 28 Connecting a Digital Cable Box Disconnect all power sources before making any connections. 1 Using a component video cable, connect the Digital Cable Box's Y, PB and PR jacks to the Y, PB and PR jacks on the TV. Use the HD/DVD IN 4 connections. Note Component video (Y, PB, PR) connection is necessary to view 480p, 720p, and 1080i formats. Note that this TV displays all format types of picture in a resolution of 852 dots × 480 lines. Connecting and Setting the TV 2 Using an AUDIO cable, connect the Digital Cable Box's AUDIO OUT jacks to the TV's AUDIO IN jacks. Note The Y, PB and PR jacks do not provide audio, so audio cables must be connected to provide sound. Y PB PR Rear of TV 1 S VIDEO VIDEO IN 3 HD/DVD IN 4 Y PB VIDEO L(MONO) AUDIO R PR L AUDIO CENTER SPEAKER IN 180W (6 ) MAX AUDIO OUT (VAR/FIX) AUDIO cable (not supplied) Component video cable (not supplied) AUDIO-L (white) AUDIO-R (red) R L(MONO) AUDIO R Digital Cable Box 29 Connecting a Digital Satellite Receiver Disconnect all power sources before making any connections. 1 Using a component video cable, connect the Digital Satellite Receiver's Y, PB and PR jacks to the Y, PB and PR jacks on the TV. Use the HD/DVD IN 4 connections. Note Component video (Y, PB, PR) connection is necessary to view 480p, 720p, and 1080i formats. Note that this TV displays all format types of picture in a resolution of 852 dots × 480 lines. 2 Using an AUDIO cable, connect the Digital Satellite Receiver's AUDIO OUT jacks to the TV's AUDIO IN jacks. Note The Y, PB and PR jacks do not provide audio, so audio cables must be connected to provide sound. Y PB PR Rear of TV 1 S VIDEO VIDEO IN 3 HD/DVD IN 4 Y PB VIDEO L(MONO) AUDIO R PR L AUDIO CENTER SPEAKER IN 180W (6 ) MAX AUDIO OUT (VAR/FIX) AUDIO cable (not supplied) Component video cable (not supplied) AUDIO-L (white) AUDIO-R (red) R L(MONO) AUDIO R Digital Satellite Receiver 30 Connecting a Digital Satellite Receiver with HDMI Connector Use this hookup if: · Your Digital Satellite Receiver has a High-Definition Multimedia Interface (HDMI). Disconnect all power sources before making any connections. Connecting and Setting the TV Using an HDMI cable (not supplied), connect the Digital Satellite Receiver's HDMI OUT connector to the TV's HDMI IN connector. Use the HDMI IN 5 connection. Tip The HDMI connector provides both video and audio signals, so it is not necessary to connect the audio cable. Rear of TV 1 S VIDEO R L AUDIO IN 5 VIDEO VIDEO IN 3 IN L(MONO) AUDIO R Digital Satellite Receiver HDMI cable (not supplied) (Continued) 31 When connecting to the Digital Satellite Receiver's DVI-HDTV connector If the Digital Satellite Receiver does not have an HDMI connector, you can connect the TV's HDMI IN connector to the Digital Satellite Receiver's DVI-HDTV OUT connector using the HDMI cable (not supplied). 1 Using a HDMI cable (not supplied), connect the Digital Satellite Receiver's DVI-HDTV OUT connector to the TV's HDMI IN connector. Use the HDMI IN 5 connection. Note The DVI-HDTV VIDEO connector does not provide audio, so audio cables must be connected to provide sound when an HDMI to DVI-HDTV adapter is used. 2 Using an AUDIO cable, connect the Digital Satellite Receiver's AUDIO OUT jacks to the TV's AUDIO IN jacks. Rear of TV 1 S VIDEO R L AUDIO IN 5 VIDEO VIDEO IN 3 IN L(MONO) AUDIO R Digital Satellite Receiver AUDIO-R (red) AUDIO-L (white) HDMI to DVI-HDTV adapter or cable (not supplied) AUDIO cable (not supplied) 32 Connecting a DVD Player or Digital Satellite Receiver via AV Receiver with CENTER SPEAKER IN terminals Use this hookup if: · You have a digital audio device that is PCM/Dolby Digital compatible, such as an AV Receiver with a Dolby Pro Logic system decoder. Disconnect all power sources before making any connections. 1 2 Using a SPEAKER cord, connect the TV's CENTER SPEAKER IN terminals to the AV Receiver's CENTER SPEAKER OUT terminals. Using a component video cable, connect the DVD player or Digital Satellite Receiver's Y, PB and PR jacks to the Y, PB and PR jacks on the TV. [. . . ] · Make sure that the antenna is connected using the supplied 75-ohm coaxial cable. · Do not use 300-ohm twin lead cables as interference may occur. · This is caused by feature of the Plasma Display Panel, and does not indicate a malfunction of the TV. Press MUTING or VOL + so that "Muting" disappears from the screen (page 40). [. . . ]