User manual SONY VAIO VPC-EH2EFX DATASHEET

[. . . ] This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. [. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. M4 × 45 (× 2) M4 × 65 (× 2) M4 (× 2) M4 (× 2) MASTER UNIT Owner's Record The model and serial numbers are located on the bottom of the unit. Refer to these numbers whenever you call upon your Sony dealer regarding this product. VAIO VPC-EH2EFX Serial No. VAIO VPC-EH2EFX Sony Corporation 2001 Printed in Korea Parts list 1 2 3 4 5 6 7 8 M4 (× 2) 5 m (196 7/8 in. ) 5 m (196 7/8 in. ) 9 0 Installation Notes · Choose the mounting location carefully so that the remote commander: -- will not interfere with driving the motorboat. -- can easy of operate the remote commander and the display is to see. If you press again within one second, you can continue manually search for another station. For example: CD1 t CD2 t ··· ·Selects MD units when several MD units are connected. For example: MD1 t MD2 t ··· ·Changes the preset groups. For example: FM1 t FM2 t AM t ··· ·Changes the TV/AUX (video) mode. ·Receives the stations memorized on the preset number buttons on the master unit. CD/MD changer 6 7 8 ATT (attenuate) indicator When the ATT function is on, the ATT indicator blinks. 9 Source information 0 Mode information Not supplied (supplied with CD/MD changer) Source Tuner Tape Source information (9) FM1, FM2, AM TAPE Mode information (0) Frequency · FWD (Forward) · REV (Reverse) · FF (Fast-forward) · REW (rewind) Disc number (with the CD/MD units) and Track number Channel number ­­­­ Volume level CHANGER COMMANDER/ DISPLAY 8 MASTER UNIT Master unit with Sony BUS system Notes · Be sure all the cords, connection plugs, and the divide box are located and fixed in position so that they are not subjected to high temperatures, vibration, sea water, rain, dust, etc. · When finished making all the connections, press the RESET button of the master unit. [. . . ] ·Receives the stations memorized on the preset number buttons on the master unit. CD/MD changer 6 7 8 ATT (attenuate) indicator When the ATT function is on, the ATT indicator blinks. 9 Source information 0 Mode information Not supplied (supplied with CD/MD changer) Source Tuner Tape Source information (9) FM1, FM2, AM TAPE Mode information (0) Frequency · FWD (Forward) · REV (Reverse) · FF (Fast-forward) · REW (rewind) Disc number (with the CD/MD units) and Track number Channel number ­­­­ Volume level CHANGER COMMANDER/ DISPLAY 8 MASTER UNIT Master unit with Sony BUS system Notes · Be sure all the cords, connection plugs, and the divide box are located and fixed in position so that they are not subjected to high temperatures, vibration, sea water, rain, dust, etc. · When finished making all the connections, press the RESET button of the master unit. [. . . ]