User manual SONY VAIO VPC-EG2AGX DATASHEET

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY VAIO VPC-EG2AGX. We hope that this SONY VAIO VPC-EG2AGX user guide will be useful to you.


SONY VAIO VPC-EG2AGX DATASHEET: Download the complete user guide (278 Ko)

You may also download the following manuals related to this product:

   SONY VPCEG2AGX (2114 ko)

Manual abstract: user guide SONY VAIO VPC-EG2AGXDATASHEET

Detailed instructions for use are in the User's Guide.

[. . . ] Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Don't throw away the battery with general house waste, dispose of it correctly as chemical waste. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] · When an FM stereo program has static noise, press FM MODE repeatedly until "STEREO" disappears. · When a stereo FM program cannot be received in stereo, press FM MODE repeatedly until "STEREO" appears in the display. · Press TUNING MODE repeatedly until "AUTO" appears in step 3 above, then press + or ­ (or TUNING + or ­ on the unit). The frequency indication changes and scanning stops when the system tunes in a station (Automatic Tuning). · To record the radio programs, use manual recording (page 16). · You can change the display into the clock display (for 8 seconds) by pressing DISPLAY. RDS may not work properly if the station you are tuned in is not transmitting the RDS signal properly or if the signal is weak. * Not all FM stations provide RDS service, nor do they provide the same types of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area. Receiving RDS broadcasts Simply select a station from the FM band. When you tune in a station that provides RDS services, the station name appears in the display. To check the RDS information Each time you press DISPLAY, the display changes cyclically as follows: Station name* t Frequency t Clock display * If the RDS broadcast is not properly received, the station name or the program type may not appear in the display. 14GB Tape ­ Play Playing a tape You can use TYPE I (normal) tape. Loading a tape 1 2 Press PUSH OPEN/CLOSE Z on the unit. Load a recorded/recordable tape into the cassette holder. 1 2 3 To Load a tape. Press N (or TAPE/N on the unit). Other operations Tape ­ Play Do this With the side you want to play/record facing towards you. Stop play Pause Fast-forward or rewind Remove a tape Press x. Press PUSH OPEN/CLOSE Z on the unit in stop mode. 15GB Tape ­ Recording Recording your favorite CD tracks on a tape -- CD-TAPE Synchro Recording You can record a whole CD on a tape. · Do not operate the system from the time the system turns on until the play starts (about 15 seconds before the preset time). · If the system is on about 15 seconds before the preset time, the Play Timer will not be activated. · You cannot use the optional component connected to AUDIO IN jack as the sound source for Play Timer. · You cannot activate the Play Timer and the Rec Timer at the same time. · The Play Timer setting remains as long as the setting is not canceled manually. 5 Set the time to start playing. Press . or > repeatedly to set the minute, then press ENTER. 6 7 Set the time to stop playing following the same procedure as step 5. or > repeatedly until the desired sound source appears. Each time you press the button, the display changes cyclically as follows: t TUNER y CD T t TAPE T 8 Press ENTER. The start time, the stop time and the sound source appear in turn, then the original display returns. 9 18GB Press ?/1 to turn off the system. Timer recording radio programs -- Rec Timer You can record a preset radio station from a specified time. To timer record, you must first preset the radio station (see "Presetting radio stations" on page 12) and set the clock (see "Setting the clock" on page 8). Use buttons on the remote for the operation. Other operations To Do this Check the setting 1 Press CLOCK/TIMER SELECT. 2 Press . Change the setting Cancel the timer Start over from step 1. 1 Press CLOCK/TIMER SELECT. 2 Press . or > repeatedly until "OFF" appears, then press ENTER. Notes 1 2 3 Tune in the preset radio station (see "Listening to a preset station" on page 13). [. . . ] · AC power cord must be changed only at the qualified service shop. Notes on discs · Before playing, clean the disc with a cleaning cloth. · Do not use solvents such as benzene, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs. · Do not expose the disc to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight. · When using discs that have glue or similar tacky substance on the label side of the disc or that used a special ink when the label was printed, there is a chance that the disc or label may become attached to parts inside this unit. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY VAIO VPC-EG2AGX




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY VAIO VPC-EG2AGX will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.