User manual SONY VAIO VPCB11GGX

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY VAIO VPCB11GGX. We hope that this SONY VAIO VPCB11GGX user guide will be useful to you.


SONY VAIO VPCB11GGX : Download the complete user guide (2662 Ko)

You may also download the following manuals related to this product:

   SONY VAIO VPCB11GGX QUICK START GUIDE (1171 ko)
   SONY VAIO VPCB11GGX DATASHEET (890 ko)
   SONY VAIO VPCB11GGX QUICK START GUIDE (1171 ko)
   SONY VAIO VPCB11GGX HARD DISK DRIVE REPLACEMENT INSTRUCTIONS (384 ko)
   SONY VAIO VPCB11GGX OPTICAL DISK DRIVE REPLACEMENT INSTRUCTIONS (348 ko)

Manual abstract: user guide SONY VAIO VPCB11GGX

Detailed instructions for use are in the User's Guide.

[. . . ] The following procedures allow you to navigate the setup utility menus: 1. To select a menu, use the cursor keys: [ ], [ ]. Device control feature parameters, such as changing I/O addresses and boot devices. To select a field within a menu or a submenu, use the cursor keys: [ ], [ ]. Entering the BIOS Setup Utility To enter the BIOS Setup Utility, do the following (or use the TrustedCore Menu, as detailed in the next section): 1. This will open the main menu of the BIOS Setup Utility with the current settings displayed. [. . . ] When [On/ Padlock Off] is pressed, Numlock is on, but [Fn] key must be pressed used for 10-key input. When [Auto] is selected, Numlock is set to On/Padlock Off when a PS/2 keyboard is connected, otherwise it is off. Windows XP preserves Numlock state when the user logs off. On Off On/Padlock Off 13 LifeBook T Series Tablet PC Video Features Submenu of the Advanced Menu The Video Features Submenu is for setting the display parameters. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help Video Features Display: Compensation: [Auto] [Enabled] Select display terminal. * This setting is not effective after operating system starts up. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Save and Exit Figure 7. Video Features Submenu Table 7: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu Menu Field Display: Options Default [Auto] Description Selects where the video signal will be routed. Note that once the system boots up, the settings for the Windows video driver take precedence over this setting. Internal Flat Panel External (Analog) External (Digital) Auto Disabled Enabled Compensation: [Enabled] Enables or disables display compensation. Display compensation is used to match the native resolution of the display with the input. For example, if you are using an application whose resolution causes it to appear smaller than the screen, enabling Compensation will expand the image to fill the screen. 14 Advanced Menu Internal Device Configurations Submenu of the Advanced Menu The Internal Device Configuration submenu allows the user to configure other internal devices. PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help [Disabled] Serial ATA port is disabled. [Enabled] Serial ATA port is enabled. Main Advanced Internal Device Configurations Serial ATA Controller: AHCI Configuration: IDE Contoller: Bluetooth(R): LAN Controller: Wireless LAN: [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Save and Exit Figure 8. Internal Device Configuration Submenu Table 8: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu Menu Field Serial ATA Controller: AHCI Controller: Options Default [Enabled] Description Enables or disables serial ATA devices. Disabled Enabled Disabled Enabled [Enabled] Enables or disables the AHCI (Advanced Host Controller Interface). This selection does not appear when Serial ATA Controller is disabled. (See Navigating through the Setup Utility on page 2 for more information) Entering a password incorrectly three times in a row will cause the keyboard and mouse to be locked out and the warning [System Disabled] to be displayed. If this happens, restart the computer by turning off and on the power with the power switch and use the correct password on reboot. Note: Unless you have previously enabled the power switch in the BIOS, it will not be possible to turn off the unit with the switch. This is applicable for non-ACPI OS's. If you set a password, write it down and keep it in a safe place. If you forget the password you will have to contact your support representative to regain access to your secured functions and data. If you make an error when re-entering the password a [Warning] will be displayed on the screen. If the Password on Boot is Disabled you will not have to type your password upon resuming the system from the Suspend or Save-to-Disk modes. The following tables show the names of the menu fields for the Security menu and its submenus, the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use. The default condition is no passwords required and no write protection. Main Advanced PhoenixBIOS Setup Utility Security Boot Info Exit Item Specific Help Supervisor Password Is: User Password Is: Set Supervisor Password Set User Password Minimum User Password Length: Password on Boot: On Automatic Wake up: Boot from Removable Media: Flash Write: Hard Disk Security Owner Information Security Chip Setting Security Panel On Resume: Clear Clear [Enter] [Enter] [0] [Disabled] [Disabled] [All] [Enabled] Press <Enter> key to set Supervisor Password to enable any password features. Then password entry is required to enter BIOS Setup. F1 Help ESC Exit [Enabled] Select Item Select Menu -/Space Change Values Enter Select Sub-Menu Figure 13. Security Menu F9 Setup Defaults F10 Save and Exit 22 Security Menu Table 13: Fields, Options and Defaults for the Security Menu Menu Field Supervisor Password is: User Password is: Options ­-- Default Clear Description A display-only field. Set is displayed when the system Supervisor Password is set and Clear when it is not. [. . . ] In order for a portable USB memory device (e. g. , JumpDrive or memory stick) to be recognized in the Boot Device Priority list, it must have been installed before booting the system. Note that some older portable USB memory devices may not be recognized as bootable devices. The Boot Menu can also be invoked outside of the Setup Utility using the TrustedCore menu or the [F12] key. (See Using the TrustedCore Menu on page 2 for more information) Main Advanced PhoenixBIOS Setup Utility Security Power Savings Boot Item Specific Help Boot Device Priority Boot priority order: 1: Floppy Disk Drive 2: Drive0: SONY MHV2040BH 3: Drive1: None 4: CD/DVD Drive 5: NETWORK: B02 D00 Yukon PXE 6: 7: 8: Excluded from boot order: : USB MEMORY: None : USB HDD: None Keys used to view or configure devices: <+>/<Space> or <-> moves the device up or down. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY VAIO VPCB11GGX




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY VAIO VPCB11GGX will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.