User manual SONY SLV-N51

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY SLV-N51. We hope that this SONY SLV-N51 user guide will be useful to you.


SONY SLV-N51 : Download the complete user guide (2206 Ko)

You may also download the following manuals related to this product:

   SONY SLV-N51 (1008 ko)
   SONY SLV-N51 annexe 3 (1045 ko)
   SONY SLV-N51 annexe 1 (94 ko)
   SONY SLV-N51 annexe 2 (1006 ko)
   SONY SLV-N51 CORRECTION NOTICE (12 ko)
   SONY SLV-N51 DIMENSIONS DIAGRAM (471 ko)

Manual abstract: user guide SONY SLV-N51

Detailed instructions for use are in the User's Guide.

[. . . ] · If anything falls into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further. · The unit is not disconnected from the mains as long as it is connected to the mains, even if the unit itself has been turned off. · Unplug the unit from the wall outlet if you do not intend to use it for an extended period of time. Installing · Do not install this equipment in a confined space such as a book or similar unit. [. . . ] Turn DIAL TIMER to set the day. 48 Recording TV programmes using the Dial Timer (SLV-SE840D/E only) About the Demonstration Mode The Dial Timer function has a Demonstration Mode that allows the user, such as a salesperson, to enter more than eight examples of timer settings when demonstrating the use of the Dial Timer. It cancels the "FULL" notice which appears if eight programmes have already been set. To activate the Demonstration Mode Press X (pause) on the VCR while turning the DIAL TIMER. To cancel the Demonstration Mode Turn the power off and unplug the mains lead. Although the Demonstration Mode is cancelled, the timer settings entered while using the Demonstration Mode will remain. Be sure to manually cancel the timer settings before you use the Dial Timer or any other timer method after reconnecting the mains lead (see page 62). Basic Operations Recording TV programmes using the Dial Timer (SLV-SE840D/E only) 49 Recording TV programmes using the ShowView® system (not available on SLVSE640D/E and SE240D) The ShowView system is the feature that simplifies programming the VCR to make timer recordings. The date, times, and programme position of that programme are set automatically. You can preset a total of eight programmes, including settings made with other timer methods. Before you start. . . · Check that the VCR clock is set to the correct time and date. · Set TIMER METHOD to SHOWVIEW or VARIABLE in the EASY OPERATION menu (see page 72). · Refer to "Index to parts and controls" for button locations. 1 Press TIMER TIMER. TI M E R M E THOD S TA NDA RD S HOW V I E W OK · When you set TIMER METHOD to VARIABLE: The TIMER METHOD menu appears on the TV screen. To operate this function correctly, the "TAPE SELECT" setting in the USER SET menu must be accurate (see page 71). Tips · To set the line input video source, you can also use the INPUT SELECT button. · You can set the extended time for the ShowView setting by 10, 20, 30, 40, 50, or 60 minutes. Set SHOWVIEW EXTEND in the EASY OPERATION menu to the desired extended time on page 72. · To check, change, or cancel the programme setting, see "Checking/changing/ cancelling timer settings" on page 62. Notes · If the VPS/PDC signal is too weak or the broadcasting station failed to transmit VPS/PDC signals, the VCR will start recording at the set time without using the VPS/PDC function. · The and indicators flash in the display window when you press ?/1 with no tape inserted. · When you set TIMER METHOD to STANDARD in the EASY OPERATION menu, the SHOWVIEW menu does not appear on the TV screen. * not available on SLV-SE240D Recording TV programmes using the ShowView® system (not available on SLV-SE640D/E and SE240D) 53 Basic Operations Recording TV programmes using the timer You can preset a total of eight programmes, including settings made with other timer methods. Before you start. . . · Check that the VCR clock is set to the correct time and date. · Set TIMER METHOD*1 to STANDARD or VARIABLE in the EASY OPERATION menu (see page 72). · Refer to "Index to parts and controls" for button locations. 1 TIMER Press TIMER. For SLV-SE640D/E and SE240D The TIMER PROGRAMMING menu appears on the TV screen. OK For SLV-SE840D/E, SE747E, SE740D/E and SX740D/E · When you set TIMER METHOD to VARIABLE: The TIMER METHOD menu appears on the TV screen. [. . . ] programmes when the · Make sure the PAY-TV/Canal Plus Scart cable is plugged VCR is in standby mode. · Make sure the PAY-TV/Canal Plus Scart cable is plugged securely. · Check that DEC is set to ON for this channel in the TV STATION TABLE menu. continued Troubleshooting 79 Symptom A tape cannot be inserted. The remote commander does not function. Remedy · Check that a tape is not already in the tape compartment. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY SLV-N51




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY SLV-N51 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.