User manual SONY ICD-U50

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY ICD-U50. We hope that this SONY ICD-U50 user guide will be useful to you.


SONY ICD-U50 : Download the complete user guide (462 Ko)

You may also download the following manuals related to this product:

   SONY ICD-U50 (691 ko)
   SONY ICD-U50 (634 ko)
   SONY ICD-U50 annexe 1 (253 ko)
   SONY ICD-U50 INSTRUCTION/OPERATION MANUAL (604 ko)
   SONY ICD-U50 INSTRUCTION/OPERATION MANUAL (555 ko)
   SONY ICD-U50 annexe 2 (458 ko)
   SONY ICD-U50 annexe 1 (458 ko)
   SONY ICD-U50 DATASHEET (574 ko)

Manual abstract: user guide SONY ICD-U50

Detailed instructions for use are in the User's Guide.

[. . . ] When you replace the battery with a new one, the clock returns to the setting display, or an incorrect date and time appear when you insert the new battery. Should any problem persist after you have made these checks, consult your nearest Sony dealer. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] during cue/review , the counter will be displayed , regardless of the display mode setting. If you keep the control key toward to the end of the recorded messages, "MESSAGE END" flashes and the IC recorder stops at the beginning of the last message in the folder. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. If you record messages in a mixture of HQ, SP and LP modes, the recordable time varies from the maximum HQ mode recording time to the maximum LP mode recording time. No more recording can be made when 99 messages each have been recorded in a folder. Due to the limitation of the IC recording system, this unit records in the minimum recording unit. If the length of each message cannot be divided by the minimum recording unit, the remaining recording time may decrease by more than the total length of the messages. When the DPC switch is set to ON, an MP3 file may be played back at a lower speed than the one you set in the "DPC 0%" menu. While the OPR indicator is flashing or is lit in orange, do not remove the battery. Before making a recording, be sure to check the remaining battery indicator. Please note that recorded messages may be erased during service or repair work. You can adjust the volume with the control key by pressing it toward VOL + or VOL ­, but the recording level is fixed. Settings (*: Initial setting) When you set the DPC switch to ON, you can adjust the speed of the playback between twice the normal speed (+100%) and half the normal speed (­50%). 1 FILE PLAY*: When the playback of one message is finished, the IC recorder stops at the beginning of the next message. CONTINUED PLAY: All messages in one folder are played back continuously. The number of directory levels allowed for the folder is 2 and the maximum number of folders is 300. Do not operate the unit while driving, cycling or operating any motorized vehicle. [. . . ] Remove the USB cap from the IC recorder and connect the recorder to the USB connector of your computer. When connecting to the microphone input connector, use a connecting cable with a resistor as follows. Press the control key right or left to select the item and then press . Recording starts when the IC recorder detects sound and stops when no sound is heard ("VOR PAUSE" flashes on the display), eliminating recording during soundless periods. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY ICD-U50




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY ICD-U50 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.