User manual SONY CMT-CP300

[. . . ] 4-233-757-16 (1) Micro Hi-Fi Component System Operating Instructions Owner's Record The model and serial numbers are located at the rear. Refer to them whenever you call upon your Sony dealer regarding this product. Serial No. CMT-CP333 CMT-CP300 © 2001 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. [. . . ] Press TAPE X. " to record on one side of Press TAPE X, and then start playing the desired source. To stop recording Press TAPE B x. Tip For recording manually: To pause recording, press TAPE X. 14 Recording CD tracks in your favorite order ­­ Program Edit Timer-recording radio programs To timer-record, make sure that you have set the system clock correctly (see "Setting the time" on page 7) and preset the radio station (see "Presetting radio stations" on page 11). 1 Load a recordable tape into the cassette holder B. 2 Load a CD onto the disc tray. 3 Do steps 1 through 6 in Program Play (see page 9). 1 Tune in the desired preset radio station (see "Listening to the radio" on page 11). 4 Press CD SYNC. The tape B stands by for recording and the CD(s) stand(s) by for playback. " " and "B" (or "b") appear, and the CD SYNC indicator lights up. To start recording on the side facing away from you, press TAPE B Y until " " changes to " . " 2 Load a recordable tape into the cassette holder B. Tape 3 Press TIMER SET on the remote. 4 Press . /> on the remote repeatedly until "REC" appears in the display. 5 Press DIRECTION on the remote repeatedly to select " " to record on " to record one side of the tape or " on both sides. "REC" and "c REC" appear in the display. 5 Press ENTER on the remote. "ON TIME" appears, then the hour indication flashes. 6 Press TAPE X. To Do this 6 Set the starting time. Press . /> on the remote repeatedly to set the hour, then press ENTER on the remote. Press . /> on the remote repeatedly to set the minute, then press ENTER on the remote. "OFF TIME" appears, then the hour indication flashes again. Stop recording Cancel Program Edit Press TAPE B x. Press PLAY MODE repeatedly until "PGM" disappears from the display. continued 15 Timer-recording radio programs (continued) 7 Set the stopping time by repeating step 6. The start time, the stopping time, "TUNER", and the preset station appear in turn, then the original display returns. 8 Press @/1 to turn off the system. When the recording starts, the volume level is automatically set to the minimum. To Do this Check the settings Press TIMER SELECT on the remote repeatedly until "c REC" appears in the display. Press TIMER SELECT on the remote repeatedly until "c REC" disappears from the display. Turn off the timer Tip Once you set the timer, the time settings will remain in the system's memory until you change them, even when you turn the system or the timer off. The settings that were last used will be in effect when you turn the timer on again. Notes · The system will turn on 15 seconds before the specified starting time. · If the system is turned on at the specified starting time, recording will not occur. · When you have set the Sleep Timer, the timer recording will not operate until the Sleep Timer Function is turned off. 16 Sound Adjustment Other Features Adjusting the sound Generating a more dynamic sound (Dynamic Sound Generator) Press DSG. Falling asleep to music -- Sleep Timer The Sleep Timer Function lets you specify a sleep time, after which the system stops playing and turns off automatically. You can thus fall asleep to music. Press SLEEP on the remote repeatedly. To cancel the DSG, press DSG again. Adjusting the bass Turn BASS. You can adjust the bass in 7 steps. Adjusting the treble Turn TREBLE. The sleep time changes as follows: AUTO* t 90MIN t 80MIN t 70MIN t . . . t 10MIN t OFF t AUTO* t . . . * The system turns off after the current CD or tape finishes playing (up to 100 minutes). The system also turns off when you manually stop the CD or tape. To Press You can adjust the treble in 7 steps. To adjust the bass or treble with the remote Other Features 1 Press BASS/TREBLE repeatedly to select "BASS" (or "TREBLE"). 2 While "BASS" (or "TREBLE") appears in the display, press . /> repeatedly to adjust the bass (or treble). Check the remaining sleep time Change the sleep time SLEEP on the remote once. SLEEP on the remote repeatedly until "OFF" appears. Cancel the Sleep Timer Function 17 Waking up to music -- Daily Timer By setting the Daily Timer, you can make the system automatically turn on and off at specified times. To use this function, make sure that you have set the system clock correctly (see "Setting the time" on page 7). 8 Press . /> on the remote repeatedly until the music source you want appears. The display changes as follows: t TUNER y CD (the current disc) T t TAPE T 9 Press ENTER on the remote. The starting time, the stopping time, and the music source appear in turn, then the original display returns. 1 Prepare the music source you want to listen to when the system turns on. · CD: Load a CD. To start playing from a specific track, make a program (see "Programming the CD tracks" on page 9). · Tape: Load a tape with the side you want to play facing towards you. · Radio: Tune in the preset radio station that you want (see "Listening to the radio" on page 11). 10Press @/1 to turn off the system. To Do this Check the settings Press TIMER SELECT on the remote repeatedly until "c DAILY" appears in the display. Press TIMER SELECT on the remote repeatedly until "c DAILY" disappears from the display. Turn off the timer 2 Adjust the volume. [. . . ] · Check the speaker connections. There is severe hum or noise. · A TV or VCR is placed too close to the unit. Move the unit away from the TV or VCR. "--:--" appears in the display. Additional Information · A power interruption has occurred. Set the clock (see page 7) and timer settings (see pages 15 and 18) again. The timer does not function. · Make sure the clock is correctly set (see page 7). · You cannot operate the Daily Timer and the timer recording at the same time. "c DAILY" and "c REC" do not appear when you press TIMER SELECT on the remote. · Make sure each timer is correctly set (see pages 15 and 18). [. . . ]