User manual SONY CDX-GT200S

[. . . ] Microsoft, Windows Media, and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Getting Started Resetting the unit Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit. Detach the front panel and press the RESET button with a pointed object, such as a ballpoint pen. If you turn the ignition switch to the OFF position without detaching the front panel, the caution alarm will sound for a few seconds. [. . . ] The unit starts to search for a station broadcasting the selected programme type. Note You cannot use this function in countries/regions where no PTY data is available. Other functions Changing the sound settings With the card remote commander In step 3, to adjust the selected item, press <, M, , or m. After 3 seconds, the setting is complete and the display returns to normal play/reception mode. With the card remote commander In step 3, to select the setting, press < or , . With the card remote commander In step 2, to adjust the selected item, press <, M, , or m. The following items can be set (follow the page reference for details): "z" indicates the default settings. "CUSTOM" of EQ3 allows you to make your own equalizer settings. The volume level is adjustable in 1 dB steps, from ­10 dB to +10 dB. After 3 seconds, the setting is complete and the display returns to normal play/reception mode. Be sure to adjust the volume for each connected audio device before playback. By connecting an optional portable audio device to the AUX input jack (stereo mini jack) on the unit and then simply selecting the source, you can listen on your car speakers. The volume level is adjustable for any difference between the unit and the portable audio device. Card remote commander RM-X114 location of controls The corresponding buttons on the card remote commander control the same functions as those on this unit. The following buttons on the card remote commander have also different buttons/functions from the unit. (For details of other operations, see "With the card remote commander" on each pages. (For details of other operations, see "With the card remote commander" on each pages. Note If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first. If your car has been parked in direct sunlight, allow the unit to cool off before operating it. ⷠPower aerial will extend automatically while the unit is operating. ) When the battery becomes weak, the range of the card remote commander becomes shorter. On a rainy day or in a very damp area, moisture condensation may occur inside the lenses and display of the unit. [. . . ] T Install the unit at an angle of less than 45° in a sturdy part of the car. T Tuning stops too frequently: Press (SENS) until "LOCAL-ON" appears. T Tuning does not stop at a station: Press (SENS) repeatedly until "MONO-ON" or "MONO-OFF" (FM), or "LOCAL-OFF" (MW/ LW) appears. The station does not broadcast any traffic announcements despite being TP. [. . . ]