User manual SONY ERICSSON DCU-10 INSTALLATION GUIDE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY ERICSSON DCU-10. We hope that this SONY ERICSSON DCU-10 user guide will be useful to you.
 |
SONY ERICSSON DCU-10 INSTALLATION GUIDE: Download the complete user guide (236 Ko) |
Manual abstract: user guide SONY ERICSSON DCU-10INSTALLATION GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] DCU-10 Installation Guide for Windows® 2000
Important note: To avoid loss of data, do not remove the USB data cable from the PC or the phone during data transfer. [. . . ] For this illustration, we made a folder called DCU10_drivers and put the driver files inside the folder.
Figure 5
9) To continue, select OK (Figure 5).
10) Select Next > (Figure 6) to go ahead with the installation.
Figure 6
11) The driver files will load into the PC and the installation process is almost complete!
Figure 7
12) To complete the installation, select Finish (Figure 7). Restart your computer.
Verifying installation on Windows® 2000 systems: 1. From the Start Menu, select "Settings" then "Control Panel", and then double click on the "System" icon. Select the "Hardware" tab and then "Device Manager". The USB Cable DCU-10 can be found under "Ports", with the COM-port number shown in parentheses. It may be necessary to enable this device in "Phone Monitor Options", found under "Control Panel". [. . . ] From the Start Menu, select "Settings" then "Control Panel". [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY ERICSSON DCU-10
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY ERICSSON DCU-10 will begin.