User manual SONOS ZP80

[. . . ] No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including but not limited to photocopying, recording, information retrieval systems, or computer network without the written permission of Sonos, Inc. Windows® XP and Windows® 2000 are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. This product includes technology owned by Microsoft Corporation and under a license from Microsoft Licensing, GP. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft Corporation and/or Microsoft Licensing, GP as applicable. [. . . ] To control the volume exclusively from your home theater or amplifier, you can change the lineout level on this ZonePlayer to Fixed by selecting one of the following options: · Using the Sonos Controller, from the Music menu, select System Settings. Using the Desktop Controller software, select Set Up Zones from the Zones menu. Note: When you change the line-out level to Fixed on your ZonePlayer ZP80, you will not be able to adjust the volume or the equalization settings using your Sonos Controller. Adjust your home theater or amplifier's volume to typical listening volume. If the line-out level on this ZonePlayer is not currently set to Variable, you will need to change it: · Using the Sonos Controller, from the Music menu, select System Settings. Using the Desktop Controller software, select Set Up Zones from the Zones menu. Use the Sonos Controller to adjust the volume on your Sonos system so you can hear music. If desired, you can readjust the volume on your home theater system or amplifier so that the volume range for the Controller falls within your typical listening range. If you are connecting to your computer: You will need a stereo mini to RCA Y-adapter audio cable (one 1/8-inch stereo miniplug to dual RCA male connectors) to connect the ZonePlayer's analog audio output to the computer's audio input. If you are connecting to powered speakers: You may need a Y-adapter audio cable (one 1/8-inch stereo miniplug to dual RCA male connectors) to connect the computer's speakers to the audio outputs on the ZonePlayer. If your speakers have a male 1/8-inch stereo plug, you will need to attach a female-to-female coupler between the speaker plug and the Y-adapter audio cable. You can easily stream an external source such as a CD player or portable music player through your Sonos Digital Music System using the audio-in connections on your ZonePlayer. Use a standard RCA cable to plug an external source like a CD player into the analog Audio In connections on the back of your ZonePlayer ZP80. If you are connecting a portable music player to the ZonePlayer ZP80, you will need a 1/8 inch mini-stereo to RCA audio cable instead. Plug the mini-stereo end into the portable device and the RCA end into the Audio In connection on the ZonePlayer. Choose one of the following options: · From the Sonos Controller, select Line-In Sources from the Music menu. Once setup is complete, simply select Line-In Sources from the Music menu, and touch Play any time you want to play music from this device. From the Desktop Controller software, select the Line-In tab from the Music Library. Once setup is complete, simply select Line-In Sources from the Music Library, and press Play Now any time you want to play music from this device. A default (typical) line-in level is automatically assigned when you select a source name. If the volume sounds too low, you can select a higher line level for this device. You may experience clipping at higher volume levels if you set the level too high. [. . . ] While it is possible to put all of your wireless devices on channel 6, it is unwise. The devices will have to compete for available bandwidth, and your entire Wi-Fi network will become sluggish and bogged down. Click the Advanced tab, and then select another wireless channel from the Wireless Channel list. Click the Advanced tab, and then select another wireless channel from the Wireless Channel list. [. . . ]