User manual SOMOGYI URC 2

[. . . ] Using a pre-programmed universal remote control is a quick and simple solution for replacing lost, broken or malfunctioning original remote controls. As it can replace 10 remote controls at the same time, you can simultaneously control your TV set, video cassette recorder, satellite receiver, stereo system etc. Due to its nature, its primary purpose to operate the most indispensable basic functions, which means that in some cases you may not be able to access some extra functions offered by outstandingly sophisticated devices. [. . . ] The button corresponding to the type of device you want to control: TV: television / VCR: video cassette recorder / AUX: stereo system / SAT: satellite receiver 3. Release all buttons as soon as the red LED located next to the SET button goes on. The LED will start flashing, which shows that the remote control unit is in quick search mode. Direct the remote control toward the device you want to operate and press the POWER button (if you are using a VCR, press PLAY). Watch the reaction, whether the TV is turned off or the VCR starts playing the cassette. If nothing happens, press the POWER again and again until the device switches off. The remote control sends a signal corresponding to the next brand code each time you press the button. *note: Due to the versatility of the product and the constantly increasing number of telecommunication devices in the world market, it is impossible to prepare an up-to-date list of all manufacturers, brands and product types compatible with the remote control. As manufacturers often take over technologies from one another, and, in addition, the same manufacturer may use different codes in its various product lines, there may be several overlaps in operating codes. In some cases, several codes may operate the device (even codes assigned to other manufacturers), the only difference being that one code provides access to more functions than the others, or sometimes the functions of the buttons may get mixed up. Therefore, it is advisable to try all codes that operate the device and then choose the one that provides highest functionality. **note: some devices react to signals slower, so make sure you wait for enough time between pressing the POWER button again and again. All buttons function properly in code search mode, so they you can test them before moving on to the next code. You can exit the quick search mode by pressing any device selection button (e. [. . . ] Codes selected earlier are retained in the memory while batteries are being replaced. Pressing any of the buttons while replacing the batteries may result in data loss!Warning Do not expose the remote control to direct heat, sunlight, dust, steam or shock. [. . . ]