User manual SMC SMCWBR14S-N5 QUICK INSTALLATION GUIDE

[. . . ] Other product and company names are trademarks or registered trademarks of their respective holders. 1 Compliances FCC - Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. [. . . ] Unique MAC address assigned to the Wireless Audio Adapter Indicates whether or not a DHCP server is available to allocate a dynamic IP address to the Wireless Audio Adapter. Options: Enabled (default) Disabled IP Address IP address currently allocated to the Wireless Audio Adapter by the DHCP server, or the static address allocated to the Wireless Audio Adapter. Subnet mask for the network to which the Wireless Audio Adapter is connected. IP address of any gateway to which the Wireless Audio Adapter is connected. IP address of an Internet DNS server to which the Wireless Audio Adapter is connected. IP address of an alternative Internet DNS server to which the Wireless Audio Adapter is connected. Indicates whether or not traffic to and from the Internet must first pass through a proxy server. 28 Subnet Mask Gateway DNS Server1 DNS Server2 Proxy Server Setting Explanation Options: Enabled Disabled (default) Proxy Hostname Proxy Port Name of the proxy server host computer. Example: proxy. mydomain. com Port on the proxy server to which the device connects. Example: 8080 Viewing Network Status Settings If you followed the Getting Started section and are successfully operating the Wireless Audio Adapter without problems, you may never need to view or update the Network Status settings. Use the remote control and follow these steps to display network status settings: 1. Section 7. 3 | Viewing Existing Network Profiles To view the details of existing network profiles: 1. From the main SMCWBR14S-N5 Utility window, select a Wireless Audio Adapter from the list and click the Configure. . . Note that the currently active profile has the Make Active button greyed out (disabled) and an "Active Profile" icon in the top right corner of the screen. Section 7. 4 | Activating a Different Network Profile To activate a different profile for a Wireless Audio Adapter: 1. Use the remote control device to select the profile directly on the Wireless Audio Adapter OR From the SMCWBR14S-N5 Utility, display the desired profile and click the Make Active button. Section 7. 5 | Verifying Wireless Audio Adapters Available on the Network In addition to the application performing an automatic discovery on startup, you can verify which Wireless Audio Adapters are available on the network at any time. This function should always be performed following changes to a Wireless Audio Adapter profile. To verify which Wireless Audio Adapters are on the network: 34 1. 2. From the main SMCWBR14S-N5 Utility window, click the Discover. . . A list of available Wireless Audio Adapters will be displayed in the main window. Section 7. 6 | Editing or Adding a Network Profile The Factory Defaults profile for a Wireless Audio Adapter cannot be edited. However, there are other profiles available that can be edited to effectively create new profiles. These can be edited at any time, but any existing information in the selected profile will be overwritten once the profile has been edited and saved. Display the profile to be edited Give your profile a unique Profile Name. [. . . ] This is an audio compression technology that is included in the MPEG-1 and -2 specifications. MP3 encoding can allow you to compress CD-quality sound by a factor of 12. MPEG-1 can provide resolution of 352x240 at 30 frames/second (fps) with 24-bit color and CD-quality sound. MPEG uses the same intraframe coding as JPEG for individual frames, but also uses interframe coding which can help to further compress the video data, thereby reducing the overall size of the video. [. . . ]