User manual SMC WBR14S-N4

[. . . ] Getting Started Before you proceed to set up the SMC BarricadeTM, connect your PC directly to your cable/DSL modem and check if you are able to access the Internet. [. . . ] Input power requirements: 100 or 240 VAC, 50-60Hz; 5 VDC, 1A. Installation Diagram SMCWBR14S-N4 Cable/DSL modem Power Adapter RJ-45 Ethernet Cable SMCWBR14S-N4 E092009-AP-R02 150200000056W Power Adapter RJ-45 Ethernet Cable EZ Installation Step 1 Insert the EZ Installation & Documentation CD into your PC's CD/DVD ROM drive. Note: If the auto-run CD installation does not start, you can manually install your SMC BarricadeTM by following the steps in the "Manual Installation" section. Manual Installation Step 1 - Logging in Open your web browser and type 192. 168. 2. 1 in the address bar, and then press Enter. When prompted, enter the username admin and password smcadmin, and then click OK. Note: Passwords are case sensitive. Step 3 - Setting up the Internet Connection For the Wizard's WAN Settings, select DHCP if you have a cable modem Internet connection for your home, click Next to continue. Step 2 Follow the on-screen instructions to set up your network connections. Note: If your home has a DSL Internet connection or your ISP has assigned a static IP Address, refer to the User Guide, which is available on the EZ Installation & Documentation CD or the SMC web site. Step 4 - Setting Your Wireless Network a. Select the security mode for your wireless network SMC recommends selecting the WPA2-PSK security mode and the AES algorithm to provide maximum security for your network. c. Technical Support Please visit our website for support : www. smc. com Driver updates: www. smc. com Step 2 - Launching the Setup Wizard On the Home Page, click Enter Setup Wizard and follow the on-screen instructions to select language and time zone of the SMC BarricadeTM. Click Next to continue. g Support g Downloads g Support g by email For additional contact information: www. smc. com Model Number: SMCWBR14S-N4 Information furnished by SMC Networks, Inc. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. [. . . ] Note: For all other configuration details, refer to the User Guide, which is available on the EZ Installation & Documentation CD or the SMC web site. [. . . ]