User manual SMC WBR14-G3

[. . . ] EZ Connect g 802. 11g Wireless 4-port Broadband Router SMCWBR14-G3 LIMITED WARRANTY Limited Warranty Statement: SMC Networks, Inc. ("SMC") warrants its products to be free from defects in workmanship and materials, under normal use and service, for the applicable warranty term. All SMC products carry a standard 90-day limited warranty from the date of purchase from SMC or its Authorized Reseller. SMC may, at its own discretion, repair or replace any product not operating as warranted with a similar or functionally equivalent product, during the applicable warranty term. [. . . ] Host Name - This field is required to be filled by some service provider. - 21 - SMCWBR14-G3 User Guide 5. If you choose 802. 1X + Static IP, you should enter the follow parameters(figure 5-9) : Figure 5-9: 802. 1X + Static IP Settings User Name - Enter the user name for 802. 1X authentication provided by your ISP Password - Enter the password for 802. 1X authentication provided by your ISP. IP Address - Enter the IP address in dotted-decimal notation provided by your ISP. Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP. Default Gateway - (Optional) Enter the default gateway IP address in dotted-decimal notation provided by your ISP. - 22 - SMCWBR14-G3 User Guide 6. If you choose BigPond Cable, you should enter the following parameters (figure 5-10): Figure 5-10: BigPond Settings User Name/Password - Enter the User Name and Password provided by your ISP. Auth Server - Enter the authenticating server IP address or host name. Auth Domain - Type in the domain suffix server name based on your location. Eg, NSW / ACT - nsw. bigpond. net. au VIC / TAS / WA / SA / NT - vic. bigpond. net. au QLD - qld. bigpond. net. au Connect on Demand - You can configure the router to disconnect from your Internet connection after a specified period of inactivity (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you want your Internet connection to remain active at all times, enter 0 in the Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet connection terminates. Caution: Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time, since some applications are visiting the Internet continually in the background. - 23 - SMCWBR14-G3 User Guide Connect Automatically - Connect automatically after the router is disconnected. Connect Manually - You can configure the router to make it connect or disconnect manually. After a specified period of inactivity (Max Idle Time), the router will disconnect from your Internet connection, and you will not be able to re-establish your connection automatically as soon as you attempt to access the Internet again. If you want your Internet connection to remain active at all times, enter "0" in the Max Idle Time field. Otherwise, enter the number in minutes that you wish to have the Internet connecting last unless a new link is requested. Caution: Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time, since some applications are visiting the Internet continually in the background. Click the Connect button to connect immediately, Click the Disconnect button to disconnect immediately. If you choose L2TP, you should enter the following parameters (figure 5-11): Figure 5-11: L2TP Settings - 24 - SMCWBR14-G3 User Guide User Name/Password - Enter the User Name and Password provided by your ISP. Dynamic IP/ Static IP ­ Choose either as you are given by your ISP. Click the Connect button to connect immediately, Click the Disconnect button to disconnect immediately. [. . . ] Type the router's LAN IP address (the default IP is 192. 168. 2. 1) into the New gateway field on the Gateway tab, and click on the Add button, as shown in the figure: Figure B-8: Gateway tab c. On the DNS Configuration tab, click Enable DNS radio, and type your computer name in to the Host field and a Domain (such as szonline. com) into the Domain field. In the DNS Server Search Order field you can type the DNS server IP address, which has been provided by your ISP, and click - 69 - SMCWBR14-G3 User Guide Add button. Shown below: Figure B-9: DNS Configuration tab Now, all the configurations are finished, it will take effect after reboot. - 70 - SMCWBR14-G3 User Guide Appendix C: Specifications General Standards Protocols Ports Cabling Type IEEE 802. 3, 802. 3u, 802. 11b and 802. 11g TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP One 10/100M Auto-Negotiation WAN RJ45 port, Four 10/100M Auto-Negotiation LAN RJ45 ports supporting Auto MDI/MDIX 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100 STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100 STP (maximum 100m) 54/48/36/24/18/12/9/6Mbps or 11/5. 5/3/2/1Mbps 9V~ 0. 8A Power, SYS, WLAN, WAN, 1-4 FCC, CE Radio Data Rate Power Supply LEDs Safety & Emissions Environmental and Physical Operating Temp. [. . . ]