User manual SMC DSP-205

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SMC DSP-205. We hope that this SMC DSP-205 user guide will be useful to you.


SMC DSP-205 : Download the complete user guide (1135 Ko)

You may also download the following manuals related to this product:

   SMC DSP-205 annexe 2 (1207 ko)
   SMC DSP-205 annexe 1 (592 ko)
   SMC DSP-205 FICHE TECHNIQUE (366 ko)

Manual abstract: user guide SMC DSP-205

Detailed instructions for use are in the User's Guide.

[. . . ] SMCDSP-200/SMCDSP-205 Series VoIP Phone Administration Guide 1/10/2007 VoIP Phone Administration Guide SMC's Limited WARRANTY MAG-07010 Rev. ("SMC") warrants its products to be free from defects in workmanship and materials, under normal use and service, for the applicable warranty term. All SMC products carry a standard 90-day limited warranty from the date of purchase from SMC or its Authorized Reseller. SMC may, at its own discretion, repair or replace any product not operating as warranted with a similar or functionally equivalent product, during the applicable warranty term. [. . . ] Schedule State Schedule Stop Select to see the current status and scheduling time. Select to stop or start scheduling update. 6 1/10/2007 Default setting Change passwd VoIP Phone Administration Guide You can restore to the default setting. MAG-07010 Rev. A Press ENTER and press a new password to replace the original password with the new one. Version Vendor ID This will show the system's firmware version. The vendor ID of SMCDSP-200 is dsp200 and SMCDSP-205 is dsp205. Watch dog Restart You can use this to enable Watch Dog function to do the debugging. Authority To do the SIP setting, NAT traversal and Administrator from Keypad, you need to input the password first. Default is "9876". 7 1/10/2007 VoIP Phone Administration Guide MAG-07010 Rev. A 3 Setup the VoIP Phone via a Web Browser Default the IP Phone's Bridge is enabled, WAN port is in DHCP Client Mode. Connect the IP Phone to DHCP server, and the server will assign an IP address to the phone. Check the IP address and add the port number ":9999" at the end of the IP address to access the web browser. Note: When selecting DHCP Client and cannot detecting the IP, the IP Phone will provide a default IP, 192. 168. 2. 25. Note: It is highly recommended to use Internet Explorer 6. 0 for web configurations. 3. 1 Login Please input the username and password into the blank field. For the Administrator, the username is: admin; and the password is: smcadmin. If you use the account login, but you can not configure the SIP setting. Click Login to move into the VOIP PHONE web based management information page. Any changes in the Web Management interface except for Phone Book require clicking Submit in that page, and then go to the Save Change page and click Save. The system will restart, and all the settings can work properly. 3. 2 System Information for the IP PHONE When you login to the web page, you can see the current system information of the IP phone, like Firmware Version, Vendor ID and Codec Version in this page. You can use mouse to click the function you want to set up. 8 1/10/2007 VoIP Phone Administration Guide MAG-07010 Rev. A 3. 3 Phone Book The Phone Book contains Phone Book and Speed Dial Settings. The Phone Book can store 140 phone numbers and the Speed Dial can store 9 phone numbers. If you want to use Speed Dial you just dial the speed dial number then press "#". 3. 3. 1 Phone Book In the Phone Book function, you can add/delete the phone number in the phone book list. You can add a maximum of 140 entries phone book list. If you need to add a phone number into the phone book, you need to enter the position, the name, and the phone 9 1/10/2007 VoIP Phone Administration Guide MAG-07010 Rev. If you want to delete a phone number, you can select the phone number you want to delete then click Delete Selected. If you want to delete all phone numbers, you can click Delete All. 3. 3. 2 Speed Dial List In Speed Dial List function, you can add/delete a Speed Dial number. [. . . ] Go to the Save Change page and click Save to reflect the changes. 3. 8 Others In Others, you can setup MAC Clone Setting, Tones Settings and Advanced Settings. 3. 8. 1 MAC Clone Setting When connecting to ISP via PPPoE, the MAC Clone function can copy the PC's MAC address to IP. Method: you can manually entered a MAC address or let the IP phone automatically detect the PC's MAC. MAC Address: When you choose Manual, enter a MAC address for the WAN port. A 3. 8. 2 Tones Settings Tones Settings function let's you configure the tones of various sounds. Go to the Save Change page and click Save to reflect the changes. 3. 8. 3 Advanced Settings You can configure some more advanced settings such as ICMP Not Echo, Send Anonymous CID, Send Flash Event, and SIP Encrypt in this page. ICMP Not Echo: setup the ICMP echo Enable/Disable. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SMC DSP-205




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SMC DSP-205 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.