User manual SMC 7904WBRAS-N

[. . . ] USER GUIDE SMC7904WBRAS-N Copyright Information furnished is believed to be accurate and reliable. However, no responsibility is assumed by our company for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of our company. We reserve the right to change specifications at any time without notice. Copyright © 2009 by SMC Networks, Inc. [. . . ] After the DHCP reservation information is saved, the DHCP reservations list displays the information. If the DHCP reservations list is not empty, you can select one or more items and click Edit or Delete. The NUMBER OF DYNAMIC DHCP CLIENTS page displays the DHCP clients (PCs or Laptops) currently connected to the device and the detailed information of the connected computers. 25 3. 2. 4 Time and Date Choose Setup > Time and Date. The TIME AND DATE page as shown in the following figure appears: In the TIME AND DATE page, you can configure, update, and maintain the time of the internal system clock. You can set the time zone that you are in and the network time protocol (NTP) server. You can also set daylight saving time to automatically adjust the time when needed. Select the appropriate time server and the time zone from the corresponding drop-down lists. Click Apply to save the settings. 3. 2. 5 Logout Choose Setup > Logout. The page as shown in the following figure appears: Click Logout to log out of the configuration page. 26 3. 3 Advanced Configuration This section contains advanced features used for network management, security and administrative tools to manage the device. You can view the status and other information of the device, to examine the performance and troubleshoot. 3. 3. 1 Advanced Wireless This function is used to modify the standard 802. 11g wireless settings. It is recommended not changing the default settings, because incorrect settings may affect the performance of the wireless performance. The default settings provide the best wireless performance in most environments. The ADVANCED WIRELESS page as shown in the following figure appears: 27 3. 3. 1. 1 Advanced Settings In the ADVANCED WIRELESS page, click Advanced Settings. The page as shown in the following figure appears: 28 The following table describes the parameters in this page. Field ADVANCED WIRELESS SETTINGS Transmission Rate Multicast Rate Transmit Power Beacon Period RTS Threshold Fragmentation Threshold DTIM Interval Preamble Type SSID Enable Wireless SSID Visibility Status Select or deselect the check box to enable or disable the wireless function. If you select Invisible, the AP is hidden and the terminal cannot obtain the SSID through passive scanning. You can select Off or User Isolation Disable WMM Advertise Max Clients SSID-1--3 Enable Wireless Guest Network SSID Select or deselect the check box to enable or disable the wireless interface. On indicates that computers connected to the device cannot communicate with each other. Set the maximum number of clients that can be connected to the AP at the same time. Select the transmission rate of the wireless network from the drop-down list. Select the multicast transmission rate of the wireless network from the drop-down list. By default, the wireless beacon frame sends the data once every 100ms. Description These settings are applicable only for more technically advanced users who have sufficient knowledge about wireless LAN. [. . . ] If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. [. . . ]