User manual SMART MX 16

[. . . ] MX 16 Digital Satellite Receiver with integrated Cryptoworks interface Operating Instructions Version 2. 06. 05. 06 Foreword These operating instructions are designed to assist you in using the MX 16 CY Digital Satellite Receiver (hereafter called "the Receiver") · in accordance with these instructions, · safely, and · in the most efficient way. We assume that users of the receiver possess a general knowledge of operating electronic media equipment. Any person, who · installs, · connects-up, · operates, · cleans, or · disposes of this receiver must have acquainted himself fully with these operating instructions. [. . . ] If the TV picture is faulty, then the antenna must be re-aligned. . Choose the desired settings. 31 8BBasic settings Child lock/PIN-Code The following settings can be made in the "Setup Child lock" sub-menu: · Set the child lock (menu block), · Change the password At the works the PIN Code "1234" has been pre-set. To call up a protected menu, the PIN code must be entered at the prompt. When the correct PIN code is entered, the selected menu opens automatically. Changing the PIN Code The PIN code set at the works can be changed and any four-digit number can be set as a personal PIN code. Make a note of the new PIN code, as after changing the code only the new number is valid. If the PIN code has been forgotten, then please contact the manufacturer. Select the menu item "Change password" using the arrow buttons " " and " " or " " and " ". The display jumps automatically to the menu item "Repeat password". The new password has now been accepted. 32 8BBasic settings Changing time settings The following settings can be changed in the "Time Settings" sub-menu: Setting Local time Options Description Enter the current time in the following format: DD;MM;YYYY ­ Day ­ HH:mm. Sets in 30-minute steps the time after which the receiver switches itself off. The receiver can be programmed so that at a set time it switches over to a specified channel. This function can be used, for example, to record a programme on a video cassette recorder. Sleep timer Timer The timer is set in the following way: Change over to the "Status" bar. At "Channel Name" the name of the selected channel is displayed as a check. At "Start" enter the time at which the receiver should switch on or over, and at "Duration" enter the length. 33 8BBasic settings Works settings Here, the receiver settings are returned to the original works settings as at delivery. All settings undertaken subsequently and any stored data will be erased. Select "Yes" if the receiver is to be returned to the works settings. If "Yes" has been selected, then the receiver automatically tries to re-programme and update the channels using the RAPS system (see page 56). To return to the TV programme, press the "EXIT" button. 34 9BOperation Operation Basic operating steps Switching between radio and TV modes If located in a menu, leave using the "EXIT" button. . To change between radio mode and TV mode, press either the "TV" button or the "RADIO" button. Selecting a channel To change to the previous or subsequent channel, press the arrow buttons " " or " " or channel buttons "CH +" or "CH ­" You can also press the arrow buttons on the receiver " " or " ". Switching to a desired channel can be done by directly entering the channel number on the numeric buttons. Volume To increase or decrease the volume, press the "VOL +" or , , VOL ­" or the " " and " " buttons. [. . . ] Hiding foreign language stations In order to keep the channel listing easy to read, foreign-language stations can be hidden. Select the option "Yes" with the arrow buttons " " and " " and confirm the selection with "OK" to hide the foreign language transmissions. A selection menu is now displayed, in which the languages to be hidden can be selected. Select the "OK" space of the non-desired languages using the arrow buttons " " and " " or " " and " ". [. . . ]