User manual SKULLCANDY LINK HANDSFREE

[. . . ] While reading the following instructions, please remember that there are thousands of different model cellphones in the world, but only one SkullcandyTM Link!The Link device will activate any feature your phone is capable of, but you need to discover all the different features as you experiment with your device. If you have any questions as to whether you purchased the correct SkullcandyTM unit for your phone, look at the hands-free device that came with your cellphone. [. . . ] The Link Console Function Switch, on many phones, serves as a Connect / Disconnect switch. Try pressing the button while the phone is ringing to see if it picks up. Virtually all cellphones have a mode that will answer the phone automatically after a predetermined number of rings or seconds. Refer to your owner's manual or call your manufacturers tech support to find how to program your individual phone to Auto-Answer mode. Even if your phone connects using the Link Console 2. 3. Function switch, experiment with the Auto-Answer mode. Athletes love this function so they never have to touch their device when a call comes in!Many phones ring or provide an audible tone into the headset, automatically when a call comes in. Often, simply programming your phone to `Headset' or `Handsfree' mode will activate this feature. Please refer to your owner's manual or manufacturer's tech support to see if your phone supports this ring-in-headset function. If you are unable to make your phone ring or tone into the headset, don't despair!Set your phone on "Vibration" mode, and keep the phone in a pocket or on your belt. When a call comes in and the phone vibrates connect the call either through the auto-answer mode, or with the connect/disconnect switch on the Link Console. Musica! Now that you are both sending and receiving calls, time to add the fun stuff!Skullcandy works with any music player (MP3, CD, DVD, Cassette, 8-Track Tape, etc. ) with a standard, 3. 5mm audio jack. The best performance is found when you preset your music player to about 75-80% volume level, and leave it there. Use the in-line volume control on the Skullcandy Link Console to find a comfortable listening level. Troubleshooting Tip: if you don't hear any music, check the volume of your player first, and the volume control on the Link Console next. Now that you have music playing, experiment with both sending and receiving calls. You will quickly notice that the music volume does not change just because you have a call! [. . . ] · Last Number Dialed o When the phone is idle, try pressing the function button. If the phone displays the last incoming or dialed number, press the button a second time, and the phone should connect the call. · Voice Activated Dialing o If your phone supports voice dialing (voice tags), try holding the button down for two seconds. [. . . ]