User manual SKIL 3115

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SKIL 3115. We hope that this SKIL 3115 user guide will be useful to you.


SKIL 3115 : Download the complete user guide (1771 Ko)

You may also download the following manuals related to this product:

   SKIL 3115 PARTS LIST (45 ko)

Manual abstract: user guide SKIL 3115

Detailed instructions for use are in the User's Guide.

[. . . ] CHECK DAMAGED PARTS Before further use of the tool, a guard or other part that is damaged should be carefully checked to ensure that it will operate properly and perform its intended function. Check for alignment of moving parts, mounting and any other conditions that may affect its operation. Learn its application and limitations as well as the specific potential hazards peculiar to this tool. [. . . ] Don't use tool for purpose not intended -- for example; don't use circular saw for cutting tree limbs or logs. It's safer than using your hand and it frees both hands to operate the tool. DIRECTION OF FEED Feed work into a blade or cutter against the direction of rotation of the blade or cutter only. Be aware of switch location and know how to shut off the tool in emergency situations. DON'T AbUSETHECORD Never use the cord to carry the tools or pull the plug from an outlet. Any alteration or modification not specified is misuse and may result in dangerous conditions. Motors in these tools normally spark, and may result in a dangerous condition. MAINTAIN TOOLS WITH CARE Keep tools sharp and clean for better and safer performance. WARNING sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: · lead from lead-based paints , · Crystalline silica from bricks and cement and other masonry products, and · Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. When the working stand can shift or rock, the power tool or work piece cannot be steadily and safely controlled. Overloading or standing on the working stand cause the stand to be "top-heavy" and likely to tip over. Failure to follow all instructions listed below may result in serious personal injury. fully assemble and tighten all the fasteners required for this stand. Also remember to occasionally check the stand and make sure it is still tight. A loose stand is unstable and may shift in use and cause serious injury. Before operating make sure the entire unit is placed on a solid, flat, level surface. [. . . ] Some of these are: Avoiding use of these and other types of cleaning agents will minimize the possibility of damage. LIMITED WARRANTY OF SKIL CONSUMER PORTABLE, BENCHTOP AND HD AND SHD HEAVY DUTY POWER TOOLS Robert Bosch Tool Corporation ("Seller") warrants to the original purchaser only, that all SKIL consumer portable, benchtop and HD and SHD Heavy Duty power tools will be free from defects in material or workmanship for a period of one year from date of purchase. SKIL Benchtop and consumer portable power tool models will be free from defects in material or workmanship for a period of ninety days if the tool is used for professional use. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SKIL 3115




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SKIL 3115 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.