User manual SINGER 9910

[. . . ] When using a sewing machine, basic safety precautions should always be followed, including the following. Always unplug this machine from the electric outlet immediately after using and before cleaning. Close attention is necessary when this sewing machine is used by or near children. Use this sewing machine only for its intended use as described in this manual. [. . . ] Lower the threader slowly and draw thread through thread guide (a) and pull toward the right. The threader will turn and the hook pin will go through the needle eye. Hook will turn and pass thread through needle eye while making a loop. Pull both upper and bobbin threads about 10 cm (4 inches) toward the back of presser foot. The machine will be set to sew straight stitches when power switch is turned on. As machine automatically feeds the fabric, do not pull nor push fabric. Remove the fabric and cut threads with the thread cutter, back to front. REVERSE STITCHING Reverse stitching is used for reinforcing the ends of the seams. Place the fabric in position where back stitching is to be made and lower the presser foot. When pattern is selected, LCD will indicate the following information of selected pattern. MIRROR STITCH When you have selected certain pattern numbers, Mirror mark will appear on the LCD. Note: When further width or length adjustment is not possible, machine will emit multiple audible beeps. Straight stitch center needle positon For top stitching, zipper sewing etc. Straight stretch stitch (center needle position) Reinforcement straight stitch 04. Straight stitch patterns should be selected to suit the type of fabric being sewn. When you reach the end of seam, release the pressure on controller and stop sewing. Your machine can sew zigzag stitches of various widths and lengths by changing the settings of the stitch width and stitch length. 6 Zigzag Stitch General or Satin Foot Zigzag stitches are very good for joining two pieces of fabrics, applique and sewing various decorative patterns. Elastic Band Sewing Pull elastic in front and back of needle while sewing. By simply removing the extension table, machine becomes a free arm machine making hard to reach areas readily accessible. Joining the pieces of fabric Join the pieces of fabric using Pattern No. When you sew, bobbin thread will pull to the top and give the appearance of a traditional hand quilting stitch. [. . . ] Interesting decorative stitches can be produced by using twin needles and threading the machine with two different colors of thread. Always make test samples to help you determine the settings best suited to a specific purpose. General Purpose Foot or Satin Foot Note: A twin needle is not provided with this machine. Place second spool of thread and pass thread through the guide and bring frontward. [. . . ]