User manual SINGER 635D DATASHEET

[. . . ] d "ON/OFF" button; Turns the machine on and off or interrupts a program. The "On" lamp illuminates. e Pushbuttons for additional functions. h PROGRAM SELECTOR switch. 4 Important safety instructions WARNING - To reduce the risk of fire, electric shock, or injury to persons while using your appliance, follow basic safety precautions, including the following: 1. Do not wash materials that have been previously cleaned or soaked in gasoline, dry cleaning solvents, or other flammable or explosive substances. [. . . ] ^ To clean the lint trap, remove the tool from behind the detergent dispenser drawer. If the main drain hose is clogged, more water will be retained in the machine (max. In this case, tighten the lint trap lid and empty the dish before repeating the procedure as often as necessary. Caution: If laundry has been washed at a high temperature, the water draining out of the machine will still be hot!Stop and allow it to cool before proceeding. ^ Open the door. 22 Cleaning and care ^ Once the flow of water stops, remove the lint trap and clean it. ^ Clean the inside of the lint trap housing. ^ Turn the drain pump impeller (in the back of the chamber) by hand to check that it rotates freely. Remove any detergent deposits or foreign objects from the thread of the filter housing and filter unit before replacing the lint trap. 23 Cleaning and care Cleaning the water inlet filters The washing machine has two water intake filters to protect the intake valves. ­ and one where the hose is connected to the machine only to be cleaned by a technician. The filter in the open end of the hose should be cleaned if intake problems occur, or after an interruption of the external water supply. To clean the filter in the intake hose: ^ Turn off the main water valve. ^ Unscrew the intake hose from the valve. ^ Remove the flat gasket from inside the hose and, using needle nose pliers, grab the plastic tab and pull to remove the filter. Use only a low-sudsing detergent at the appropriate temperature. ­ Clean the filters in the water inlet system. Make sure the drawer is in all the way. Clean the siphon tube. . Lime deposits appear on the drum surface? Not enough detergent has been used. ­ Follow recommendations on the package. A product called "Quick" is available from the Miele Technical Service Dept. ­ Use the correct amount of detergent for the water hardness in your area. 27 Problem solving guide What to do if, . Liquid detergent does not give the desired result? Insufficient detergent was ­ Add more detergent. used to break down the ­ Before washing the particles of grease in next load run a COTheavily soiled laundry. TONS 120°F program with detergent but without a load to clean the machine. Liquid detergents do not ­ Use a general purpose contain bleaching agents. powder detergent conThey do not remove taining a bleaching stains as well as powagent. dered detergents contain- ­ Pre-treat stains with a ing non-chlorinated stain remover. [. . . ] For more information on the electrical connection and the "Easy Installation Kit" please contact ­ the nearest Miele Technical Service Department. 40 Programmable functions Warning - To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. The following additional functions can be programmed into the machine if desired: Program Lock (Child Safety Feature) When activated, the washing machine will ignore any changes made after the first three minutes of operation. For example, if the Program Selector is moved to a different setting or an additional function is selected after the first three minutes, the "On" lamp will flash, notifying you that the Child Safety Feature has been activated. This prevents children from inadvertently changing or stopping a wash program by playing with the dials. [. . . ]