User manual SIMPLETECH 60000-00086-001

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SIMPLETECH 60000-00086-001. We hope that this SIMPLETECH 60000-00086-001 user guide will be useful to you.


SIMPLETECH 60000-00086-001 : Download the complete user guide (25 Ko)

Manual abstract: user guide SIMPLETECH 60000-00086-001

Detailed instructions for use are in the User's Guide.

[. . . ] Memory Modules Installation Guide Use this guide along with your computer user guide to install your memory upgrade. Some computer manufacturers may void the warranty, if the system is opened and upgraded by the end user. [. . . ] Remove the Existing Memory Modules, If Necessary: If all memory sockets are populated, you might want to replace the lower capacity memory modules with higher capacity memory modules. To remove the lower capacity memory modules, push the locking tabs away from the modules for DIMMs, or release the SO-DIMMs by pushing the retaining tabs away from the sides of the SO-DIMMs. Some computers require a specific sequence of memory sockets to be populated, based on capacity of the memory modules. Refer to your computer user guide and determine the socket sequence specified for the memory upgrades, if any. Install the Memory Modules in the Sockets: Refer to the illustration below and orient the memory to the socket so that the key notches of the memory module align with the keys of the socket. Pushing the memory module into the socket with the wrong orientation might damage the memory modules or the sockets. For DIMMs, push the memory by pressing the top edge straight down into the socket; the locking tabs will automatically close to secure the memory. For SO-DIMMs, fit the memory module into the socket at a 30-degree angle, and gently push it into the socket until 75% of the edge-connector is covered; then pivot the module into the socket until the retaining tabs click into place to secure the memory module. Make sure the module is firmly seated in the socket. Installing New DIMMs for Desktop/Server Computers 1. If necessary, remove the existing memory modules by pushing the locking tabs away from the modules, and pull the module carefullay away from the socket 3. [. . . ] For support details, warranty and return policy, please visit our web site www. simpletech. com The installation of memory modules is complete. 8. 9. Document #: 60000-00086-001 Copyright Feb 20002 SimpleTech, Inc. www. simpletech. com [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SIMPLETECH 60000-00086-001




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SIMPLETECH 60000-00086-001 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.