User manual SIMPLETECH 60000-00020-003

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SIMPLETECH 60000-00020-003. We hope that this SIMPLETECH 60000-00020-003 user guide will be useful to you.


SIMPLETECH 60000-00020-003 : Download the complete user guide (106 Ko)

Manual abstract: user guide SIMPLETECH 60000-00020-003

Detailed instructions for use are in the User's Guide.

[. . . ] Also, your computer must have a microphone and speakers or you must use the optional line access cable with a compatible handset. Refer to the User Guide for information on the optional line access cable. Be sure to configure the communications software for the appropriate microphone and speakers. 6 Exit Windows NT before unplugging the 33. 6 Communicator with SimpleJack. [. . . ] Refer to the User Guide for information on the optional line access cable. Be sure to configure the communications software for the appropriate microphone and speakers. It is recommended that you stop the 33. 6 Communicator with SimpleJack before removing the 33. 6 Communicator with SimpleJack. Double-click on the PCMCIA icon located on the right of the task bar; B. Select the socket in which the 33. 6 Communicator with SimpleJack is plugged; C. When prompted, push the eject button on the computer (if applicable) and pull the 33. 6 Communicator with SimpleJack from the socket. Page 2 Simple Installation Guide Installation with Windows 3. x For installations with Windows NT, Windows 95, OS/2 Warp or MacOS, refer to the other pages. With MS-DOS 6 or higher, this will load the drivers in CONFIG. SYS one line at a time. When prompted, press "Y" to load each driver and look for messages indicating that Socket Services Release 2. 1 (or higher) and Card Services Release 2. 1 (or higher) are loading. If you require Card and Socket Services, contact your computer manufacturer for a copy and install Card and Socket Services before continuing. If you have Card and Socket Services installed, let the computer boot to the DOS prompt. The computer may respond with a tone when the computer recognizes the 33. 6 Communicator with SimpleJack. Lift the hinged top of the SimpleJack connector and attach a phone line. If there is no room to open the jack, slide the jack out and attach the jack to the connector on the right; then, attach the phone line. If you find that the SimpleJack connector is not appropriate for your application, you may purchase a line access cable (P/N STI-FAX/CCBL). Refer to the User Guide for instructions on how to install the optional line access cable. To attach to a cellphone. Refer to the Quick Installation Guide that came with the cellphone cable for instructions on how to install the cellphone driver. ! If both cellphone and phone lines are attached, the 33. 6 Communicator with SimpleJack will use the cellphone and ignore the phone line. 4 Install and start the communications software. Refer to the installation sheet that came with the communications software for instructions on how to install and start the communications software. To use the voice capabilities of the 33. 6 Communicator with SimpleJack, your computer must have a microphone and speakers or you must use the optional line access cable with a compatible handset. Refer to the User Guide for information on the optional line access cable. Be sure to configure the communications software for the appropriate microphone and speakers. [. . . ] Make sure the computer is not accessing the 33. 6 Communicator with SimpleJack, then remove the 33. 6 Communicator with SimpleJack as follows: A. Pull the 33. 6 Communicator with SimpleJack from the socket. Page 4 Installation with MacOS System 7 For installations with Windows 3. x, Windows NT or Windows 95 or OS/2 Warp, refer to the other columns. Lift the hinged top of the SimpleJack connector and attach a phone line. If there is no room to open the jack, slide the jack out and attach the jack to the connector on the right; then, attach the phone line. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SIMPLETECH 60000-00020-003




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SIMPLETECH 60000-00020-003 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.