User manual SILVERCREST SWKD 3000 A1 KETTLE

[. . . ] Due to the high power consumption, in older electrical installations the fuse (12A) could trigger. This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. Children should be supervised to ensure that they do not play with the appliance. ­ the appliance, plug and power cable are in a faultfree condition and. [. . . ] If you want to bring water to a boil (100°C), you only need to press the On/Off button e. - You can cancel the heating up of the water at any time by pressing the On/Off button e. - Once you lift the kettle from the base y, the appliance switches all functions off. Do not let the water stand in the kettle for longer than is absolutely necessary. The keep-warm setting can be made before, during or immediately after the boiling process: Before the boiling process og c · The water will now also be kept warm after being heated. The appliance will then automatically maintain the keep-warm temperature at the temperature you selected to heat the water. the LED q of the currently set temperature glows , the LED integrated in the KEEP WARM w button glows as well as the LED in the On/Off e button. With this kettle you can maintain the water at a temperature of (about) 40°C, 60°C, 80°C or 100°C for 30 minutes. Should you have set the desired temperature maintenance at 100°C, to avoid excessive steam development the kettle holds the water at a temperature of between about 90°C and 100°C. If the desired heating maintenance temperature is 80°C, 60°C or 40°C, the water heater holds the water at a temperature of between about 8°C above or below the selected temperature. If there is less water in it, the kettle may be switched off within the 30 minutes in order to protect the heating element. BEFORE you lift the kettle from the base y, first disconnect the plug from the mains power socket. This prevents causing a short circuit by water possibly spilling out of the kettle and falling onto the live electrical connections in the base y. For safety reasons, the lid should not be opened while the water is boiling or is very hot. As soon as the water temperature falls below the set temperature, the kettle heats up again automatically. - At any time you can cancel the temperature maintenance of the water by pressing the On/Off button e or the KEEP WARM button w. - Once you lift the kettle from the base y, the appliance switches all functions off. First disconnect the plug from the mains power socket and allow the appliance to cool down. Clean all exterior surfaces and the power cable with a slightly moist cloth. To clean the inside of the kettle, thoroughly rinse it out with water and then pour the water away. [. . . ] The warranty covers only claims for material and manufacturing defects, not for transport damages, wearing parts or for damage to fragile components, e. This product is for private use only and is not intended for commercial applications. In the event of misuse and improper handling, use of force and interference not carried out by our authorized service branch, the warranty will become void. The warranty period is not extended by repairs effected under warranty. [. . . ]