User manual SILVERCREST SSTS 1500 A1 CAMERA TRIPOD

[. . . ] This tripod is designed for attaching video and photo cameras or other devices with a matching thread. [. . . ] â· Adjust the tripod plate 3, with the device, into the required position. Note: You can adapt the tripod legs 6 to uneven ground by bending them. It is also possible to position the tripod using the flexible tripod legs 6 for example, on railings or similar. However, always ensure that the tripod with the mounted device is standing safely and securely. When a device is screwed onto the quick release plate 2 you can, by pressing the four locking pins 4 on the sides of the tripod plate 3, release the device together with the quick release plate 2 from the tripod plate 3. To replace the quick release plate 2 complete with the device back on the tripod plate 3, press the locking pins 4 and reposition the quick release plate 2. Then release the locking pins 4, so that the quick release plate 2 is firmly seated. Loading: 1500 g (with tripod legs extended) Length: 27 cm (with tripod legs planted/extended) Thread: 1/4 inch Weight : 155 g In case of doubt, please contact your waste disposal centre. [. . . ] â· Screw the device onto the quick release plate 2 so that it is firmly seated. [. . . ]