User manual SILVERCREST SSOT 6 A1

[. . . ] ½ This device is not designed to be used by people (including children) with limited physical, sensory or mental abilities or who lack the experience and / or knowledge to use it, unless they are supervised by a person responsible for safety or receive instructions from such a person as to how the device should be used. Children have to be supervised to ensure that they do not play with the device. Do not expose the device to - extreme temperatures, - strong vibrations, - heavy mechanical loads, - direct sunlight. Please note that the guarantee does not cover damage caused by incorrect handling, non-compliance with the operating instructions or interference with the device by unauthorised individuals. [. . . ] Note: The appliance automatically switches off if it is not operated for longer than 1 minute. When the sleep mode has been activated, the LC display 5 switches itself off. When the sleep mode has been deactivated, the appliance switches to standard mode. If the thermometer has been operated under normal conditions, the result of the last measurement taken before the appliance was switched off The measured value is available again along with information on the date, time and measurement mode when the "MEM / SET" button 1 is pressed again. It is advisable to carry out 3 measurements in a row at the same place and to take the highest temperature as the measured value. With different room temperatures, let the appliance lie in the room where the temperature is to be taken for at least 30 minutes to "acclimatise" it. Before measuring your body temperature, you should relax for about 5 minutes. If you have done any physical activity or taken a bath, wait for at least 30 minutes before taking a measurement in order to get a measurement that is as accurate as possible. Ensure that the forehead or temple is clean, free of injuries and not covered with sweat, cosmetics or ointment. Take a note of what measurement method you used to measure the temperature and inform your doctor of it. If the sleep mode has been activated, activate the thermometer again by pressing any button before taking the measurement. Carefully press on the protective cap 9 and remove it with a gentle rotary motion and without using any force. Values can be displayed in °C as well as in °F (see "Functions / error analysis - selecting the temperature unit"). Note: The appliance automatically switches off if it is not operated for longer than 1 minute. When the sleep mode has been activated, the LC display 5 switches itself off. When the sleep mode has been deactivated, the appliance switches to standard mode. If the thermometer has been operated under normal conditions, the result of the last measurement taken before the appliance was switched off is stored. The measured value is available again along with information on the date, time and measurement mode when the "MEM / SET" button 1 is pressed again. the appliance has 9 storage spaces (see "Functions / error analysis - the memory function"). Use as a household thermometer (scan mode) The thermometer can also be used in the house for non-contact temperature measurements in the range of ­22. With this measurement , the current surface temperature of the object is displayed. It can be different from its internal temperature, especially if the surface is exposed to direct sunlight or a draught! [. . . ] Contact your local refuse disposal authority for more details of how to dispose of your worn-out product. In the interests of environmental protection, do not throw the product away with domestic waste when it is worn out, but take it to a proper disposal facility. Contact your local authority to find out about collection centres and their opening times. Faulty or used batteries must be recycled in accordance with Council Directive 2006 / 66 / EC. [. . . ]