User manual SILVERCREST SPU 900 A1

[. . . ] Read the operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference. Pass this booklet on to whoever might acquire the appliance at a future date. All rights including those of photographic reproduction, duplication and distribution by means of particular methods (for example data processing, data carriers and data networks), wholly or partially as well as substantive and technical changes are reserved. Warning A warning of this danger level signifies a possible dangerous situation. [. . . ] Also here, the above listing of programmable cities and their time difference is valid. Repeatedly press the SNOOZE/DIMMER button y to adjust for a summer time offset in the selected world time. Time Explanation offset Display 1 OFFSET 1 In your time zone (local city) it is winter time and in the adjusted world time it is currently summer time. 0 OFFSET 0 In your time zone (local city) and in the adjusted world time it is currently winter time resp. -1 OFFSET In your time zone (local -1 city) it is summer time and in the adjusted world time it is currently winter time resp. Programme the reminder function You can programme in up to 10 dates on which the appliance can give you a reminder when they arrive. Press the buttons DOWN/UP i/o to programme in the first desired memory date. If you press the SNOOZE/DIMMER button y, the year number will be deactivated and you will thus receive a reminder on this date every year. To deactivate the memory function, programme in a date that lies in the past. Programme the Update function With this function the appliance can automatically up-date the time by using RDS-Data. Press the DOWN/UP i/o button to set the desired time frame for the sleep function between 1 and 59 minutes. When set to "OFF" the projection lights up permanently and can be switched on or off by pressing the PROJECTION button a. The display g shows "DT 23:00 ON" as the time at which the display is to be The display g shows "DT 6:00 OFF" as the time at which the display is to return to its normal brightness. Using the buttons DOWN/UP i/o set the desired time interval (a time span between 1 minute and 23:59 h is possible). Should the time be expired, the timer signal will sound for about 10 minutes, the NAP indicator flashes and the time is displayed. If you wish to end the Timer function before the alarm, press and hold the button NAP/USER k for one second. Alarm function (Alarm 1 to 4) You can programme in up to four alarm times on your radio alarm. 15 seconds, the appliance saves the adjustment and then leaves the programming mode. Using the PRESET/ALARM +/­ buttons s/d, select the desired alarm memory position. Ing down one of the buttons DOWN/UP i/o changes the alarm time in quick succession. Press the button SNOOZE/DIMMER y to set the weekdays on which you require the alarm function: You can choose between "workdays" (MON, TUE, WED, THU, FRI), "weekends" (SAT, SUN) and "every day" (MON, TUE, WED, THU, FRI, SAT, SUN). Hold the button SNOOZE/DIMMER y pressed down for 2 seconds when you want to be woken on a specific weekday. [. . . ] Button lock Press and hold the MODE/LOCK button e until the key symbol is indicated in the display g. To disable the button lock function, press and hold the MODE/ LOCK button e once again until the key symbol extinguishes. This appliance has been tested against, and found to be in compliance with, the fundamental requirements and other relevant stipulations of the EMC Directive 2004/108/EC, as well as the Guidelines of the Low Voltage Directive 2006/95/EC. Moisture penetrating into the appliance creates the risk of electric shock! [. . . ]