User manual SILVERCREST SMZ 260 C2

[. . . ] Should the power cable or motor block become damaged, arrange for the universal food processor to be repaired by a qualified specialist before using it again. Should you do so, appliance safety can no longer be assured and the warranty becomes void. Separate your universal food processor from the mains supply immediately after use. The appliance is completely free of electrical power only when you unplug it . [. . . ] After the appliance has run for for this period it must be switched off until the motor has cooled itself down. Before using the appliance for the first time, clean it thoroughly as per the instructions given in the chapter "Cleaning". Then turn the lid 4 so that the lugs slide unter the slots and the lid 4 locks into place. ³ To make use of the higher processing speed "Turbo", press, in addition to the motor block 2, the turbo button 1 and keep it pressed down, as shown in Figure C. ³ Place the blade holder 5 with the knife 7 on ³ Prepare the items to be processed by cutting lar³ Place the food to be processed in the bowl 6. Thereby, take note of the following table: Foodstuff Salami Cheese Ge pieces to a size that will fit in the bowl 6. Should larger pieces of the contents collect on the wall of the bowl while processing, lift the motor block 2 from the lid collar 3. Before the processing, particularly hard foods must be cut into smaller pieces (about 2cm). For this, press the turbo button 1 repeatedly for a short time (in addition to the motor block 2). Should the foodstuff not be completely pulverised, you can either cut it into smaller pieces or lift the motor block 2 from the lid collar 3. ³ When the contents have been sufficiently chopTurbo ped, release the motor block 2 and, if necessary, the turbo button 1. Never attempt to remove food from the bowl 6 when the blade 7 is still in motion. Using the whisk attachment 0, you can also whip cream with this appliance: ³ Wait until the blade 7 has stopped rotating. ³ Place the blade holder 5 with the knife 7 on ³ Push the whisk attachment 0 onto the blade holder 5: For 100 ml of cream, place it on the blade holder so that the whisk attachment 0 rests on the two blades and engages. For 200 ml of cream, turn the whisk attachment 0 vertically through 180°, so that it rests on only one blade and engages. ³ Carefully pull the blade holder 5 with the knife ³ Remove the contents. This is normal and does not influence the functioning of the appliance. After you have finished processing the foodstuffs, you can use the appliance base o as a cover for the bowl y, this will help to keep the foodstuff fresh for longer. The blade retainer 5 with the blade 7 can, if you wish, remain in the bowl y. You can now place appliance base o on the bowl y so that it seals the bowl y. Then turn the lid 4 so that the lugs slide unter the slots and the lid 4 locks into place. To whip cream optimally, it should be well chilled before being whipped (max 8°C / refrigerator temperature). [. . . ] The appliance has been manufactured with care and meticulously examined before delivery. In the event of a warranty claim, please make contact by telephone with our Service Department. The warranty covers only claims for material and manufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e. This product is for private use only and is not intended for commercial use. [. . . ]