User manual SILVERCREST SLM 11 B2

[. . . ] Read through the operating instructions carefully before using for the first time and retain them for future use. If you are handing over the device to another person also include the instructions. [. . . ] Now plug the charging device into the 12/24 V power socket of your car. As a rule this is the cigarette lighter socket in the dashboard of your car. Numerous vehicles have a second socket in the rear seat area or in the boot. The green LED signalises the operating mode display of the charging device, it also lights up if no mobile phone is connected. depending on the vehicle type it is possible that the ignition has to be switched on first. The charging process begins immediately and is shown in your mobile phone's display. When your mobile phone shows a fully charged battery remove the charging device from the 12/24V connection. Remove the charging device only by grasping the plug never pull it out by the power cord. IMPORTANT Never connect the device without charging your mobile phone!The device also consumes power in standby mode and therefore must be disconnected from the on-board power supply after use!With this device you receive a 3 year warranty from the date of purchase. the device was meticulously manufactured and thoroughly tested before delivery. [. . . ] Many adapters have to be pressed lightly downwards (Sony EricssonTM) or small buttons have to be pressed (SamsungTM) to remove the adapter from the phone. This product is subject to the provisions of European Directive 2002/96/EC. [. . . ]