User manual SILVERCREST SHTD 2200 A1

[. . . ] As additional protection, the installation of a faulty-current protection unit with an activation power rating of not more than 30 mA is recommended for the power circuit in the bathroom. Remove the plug of the Professional Hair Dryer from the power socket in the event of functional irregularity and before cleaning the appliance. Do not wrap the power cable around the Professional Hair Dryer and protect it from damage. Should the power supply cable of this appliance become damaged, to avoid risks it must be replaced by the manufacturer, his Customer Service or a similarly qualified person. [. . . ] Never touch or handle the Professional Hair Dryer, the power cale or plug with wet hands. Immediately separate the Professional Hair Dryer from the power source after use. The appliance is completely free of electrical power only when you unplug it . You are not permitted to open the housing of the Professional Hair Dryer or carry out repairs to it. Should you do so, the safety of the appliance may be compromised and the warranty becomes void. This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. Children should be supervised to ensure that they do not play with the appliance. When it is switched on, never lay the Professional Hair Dryer down or leave it unsupervised. Never place the Professional Hair Dryer close to sources of heat and protect the power cable against potential damage. Should the Professional Hair Dryer be dropped or otherwise sustain damage, it may no longer be used. First pack and transport the hair dryer when it has completely cooled down. Danger of electric shock ALWAYS remove the plug from the power socket before cleaning the hair dryer. After being cleaned, the hair dryer must be completely dry before using it again. Cleaning the housing To clean the housing, use a soft cloth moistened with a mild soapy solution. This product is subject to the provisions of European Directive 2002/96/EC. Dispose of the appliance through an approved disposal centre or at your community waste facility. Replace the air suction grill w back onto the hairdryer so that the arrow on the air suction grill w points to the bottom arrow on the hairdryer. Turn the air suction grill w clockwise until the arrow on the air suction grill w points to the upper arrow on the hairdryer. Should your Professional Hair Dryer not function as expected, first remove the plug from the wall socket and allow the appliance to cool down for a few minutes. Should the appliance still not function, consult the service department detailed on the Warranty Card. [. . . ] The warranty for this appliance is for 3 years from the date of purchase. The appliance has been manufactured with care and meticulously examined before delivery. In the event of a warranty claim, please make contact by telephone with our Service Department. The warranty covers only claims for material and maufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e. [. . . ]