User manual SILVERCREST SHS 12.0 A1 12V HAND-HELD VACUUM CLEANER

[. . . ] Before using the device for the first time please make yourself familiar with all its functions. Please refer in addition to the advice on operation and safety given below. If you pass the product on to anyone else, please ensure that you also pass on all the documentation. The hand-held vacuum cleaner is intended for the vacuum cleaning of dry surfaces or for sucking up dry materials. [. . . ] If a dangerous situation arises pull out the plug from the socket immediately. Always have any repairs carried out or When not in use always ensure that electrical devices are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical devices are dangerous when they are used by inexperienced people. Take all the parts carefully out of the packaging and remove all the packaging material. Note: Always make sure that the dust filter 11 is installed before you use the device. Extension hose 5 : Insert the smaller end of the extension hose 5 snugly into the front nozzle 4 . insert the desired attachment 6 7 8 snugly into the extension hose 5 . You can also use the large brush 6 in combination with the extension hose 5 as described above. Small brush 7 : This attachment has harder bristles and is therefore very suitable for loosening stubborn dirt, e. On the upholstery or in the footwells, before vacuuming it away, see Fig. Crevice tool 8 : Use this attachment to get into narrow, difficult-toaccess places. Removing attachments: Simply pull the attachment off the front nozzle 4 or the extension hose 5 . To switch the device off, press the ON / OFF switch 2 back into the OFF position. For the best possible performance, you should empty the dust container 10 immediately after use and when the suction power drops. Press the unlocking button 1 and take the dust container 10 out of the housing 12 . You will be able to clean the dust filter better if you detach it from the end seal. To do this, hold the end seal firmly and twist the filter off carefully anticlockwise (bayonet fitting). Rinse out the dust filter 11 thoroughly in cold water and allow both parts (filter and end seal) to dry completely. Carefully replace the dust filter 11 back into the dust container 10 . [. . . ] The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. The warranty period will not be extended by repairs made unter warranty. Any damage and defects extant on purchase must be reported immediately after unpacking the appliance, at the latest, two days after the purchase date. Repairs made after the expiration of the warranty period are subject to payment. [. . . ]