User manual SILVERCREST SHGD 40 A1

[. . . ] 12 14:19 Safety instructions RISK OF ELECTRIC SHOCK ► Connect the appliance only to mains power sockets supplying a mains power voltage of 220 - 240 V ~ / 50 Hz. In the event of it being damaged the whole appliance must be disposed of. –º In the event of operating malfunctions, and before cleaning the appliance, disconnect the plug from the mains power socket. –º To disconnect the power cable, always pull the plug from the socket, do not pull the power cable itself. [. . . ] The recirculation of packaging into the material circuit saves raw material and reduces the amount of waste generated. Dispose of packaging material that is no longer needed as per the regionally established regulations. NOTICE ► If possible preserve the appliance's original packaging during the warranty period so that, in the event of a warranty claim, you can package the appliance ideally for its return. Technical data Mains voltage Nominal power Protection class 220 - 240 V ~, 50 Hz 40 W II SHGD 40 A1 IB_72506_SHGD40A1_CZ_SK. 12 14:19 GB Appliance description 1 Display 2 Temperature button 3 On/Off button 4 Locking device 5 Suspension loop 6 Hotplates Before straightening ■ The hair should be clean, dry and free of styling products. Excepted are the special products that support a straightening of the hair. –  Comb the hair thoroughly before straightening so that there are no knots in it. Operation Preparation NOTICE ► The hotplates 6 must be free from contamination of all kinds. If necessary, clean them before taking them into use (see chapter "Cleaning"). The appliance is locked, the locking device 4 is pressed in on the side 1) Insert the plug into a mains power socket. 2) Press and hold the On/Off button 3 until the display 1 is illuminated. The colour of the display 1 indicates whether the temperature has already been reached: – red: the temperature has not yet been reached. 3) Select the appropriate temperature for your hair: – 130 - 140°C, minimum heat level, for very fine hair. €“ 140 - 160°C, low heat level, for fine hair. €“ 160 - 180°C, medium heat level, for normal hair. €“ 180°C- MAX, highest heat level, for thick or difficult to shape hair. Press the temperature button 2 on the side marked "+" to increase the temperature. Press the temperature button 2 on the side marked " -" to reduce the temperature. 12 14:19 4) As soon as the display 1 colours itself blue, the programmed temperature has been reached. 5) Press the hot plates 6 together and, at the same time, press the locking device 4 on the side NOTICE ► This appliance has a memory function. [. . . ] If you do not intend to use the appliance for some time: ■ Clean the appliance as described in the section "Cleaning". –  Press the hot plates 6 together and then press the locking device 4 on the side in. GB Troubleshooting Problem Cause The plug is not inserted into a mains power socket. Never linger for a prolonged period at a specific point on the hair. [. . . ]